Charging The Battery Pack - Advantech DLoG DLT-V72 Series User Manual

14.1.2. Charging the battery pack

Connect the properly installed DLT-V72 to the main supply voltage.
WARNING
DLT-V72 Series User Manual V2.70
Electric shock when charging the battery pack
DLT-V72 devices with integrated UPS contain battery packs.
These can ignite if handled or stored improperly (risk of fire),
cause chemical burns or release toxic substances.
1. The cable cover of the DLT-V72 must be screwed together
properly.
2. The battery pocket must be screwed together properly.
3. The device must be fully closed.
4. Do not connect damaged battery packs to the DLT-V72; do not
charge.
5. Battery packs become warm while charging; this is normal.
However, if they become excessively hot, immediately
disconnect the DLT-V72 from the power source.
6. Do not continue to use the DLT-V72 if you notice an unusual
level of heat or an unusual smell during charging.
7. Provide for sufficient ventilation of the DLT-V72 during
charging.
148 / 173
Optional Equipment