2.1
Introduction
This chapter provides instructions for setting the internal jumpers and definitions of
the external connector pin assignments.
2.2
System Status
2.2.1
System Status LED Indicators
The LED indicators located at the top right of the front panel are used to show the
system health and active status.
The table below provides an explanation of the LED indicator behaviours.
Item
LED
1
PWR/Fault
2
HDD
ITA-3650G_Series User Manual
Figure 2.1 ITA 3650G Indicator Locations
Status
Color
Description
On
Green
System power is on, system is safe
On
Red
System is overheating
On
Data is being received/transmitted
Yellow
Off
No data is being received/transmitted
6
HDD indicator
Power/alarm indicator