Introduction; System Status Indicators; System Status Led Indicators; Jumpers And Connector - Advantech ITA-3650E Series User Manual

2.1

Introduction

The following sections show the internal jumper settings and the external connector
pin assignments for application integration.
2.2

System Status Indicators

2.2.1

System Status LED Indicators

The top right LED of the front panel indicates system health and active status.
Refer to the table below for an LED definition summary.
Item LED
1 PWR/FAULT
2 HDD
2.3

Jumpers and Connector

2.3.1

Jumper Description

You may configure the ITA-3650E to match the needs of your application by setting
jumpers. To close a jumper, you remove the clip. Sometime a jumper will have three
pins, labelled 1, 2 and 3. In this case you would connect either pins 1 and 2, or 2 and
3.
ITA-3650E Series User Manual
Figure 2.1 ITA 3650 LED
Status Color Description
On Green System power is on, system is safe
On Red System voltage overheated
On Data being received/transmitted
Yellow
Off No data being received/transmitted
Open Closed
6
HDD Indicator
Power/Alarm Indicator
2-3 Closed