Table of Contents
Advertisement
This chapter describes safety precautions and product information you have to know
and check before installing EKI-6310GN.
2.1
Preparation before Installation
Professional Installation Required
Please seek assistance from a professional installer who is well trained in the RF
installation and knowledgeable in the local regulations.
Safety Precautions
1.
To keep you safe and install the hardware properly, please read and follow these
safety precautions.
2.
2. If you are installing EKI-6310GN for the first time, for your safety as well as
others', please seek assistance from a professional installer who has received
safety training on the hazards involved.
3.
Keep safety as well as performance in mind when selecting your installation
site, especially where there are electric power and phone lines.
4.
When installing EKI-6310GN, please note the following things:
Do not use a metal ladder;
Do not work on a wet or windy day;
Wear shoes with rubber soles and heels, rubber gloves, long sleeved shirt or
jacket.
5.
When the system is operational, avoid standing directly in front of it. Strong RF
fields are present when the transmitter is on.
2.2
Installation Precautions
To keep the EKI-6310GN well while you are installing it, please read and follow these
installation precautions.
1.
Users MUST use a proper and well-installed surge arrestor with the EKI-
6310GN; otherwise, a random lightening could easily cause fatal damage to
EKI-6310GN.
EMD (Lightning) DAMAGE IS NOT COVERED UNDER WARRNTY.
2.
Users MUST use the "Power cord & PoE Injector" shipped in the box with the
EKI-6310GN. Use of other options will cause damage to the EKI-6310GN.
3.
Users MUST power off the EKI-6310GN first before connecting the external
antenna to it. Do not switch from built-in antenna to the external antenna from
WEB management without physically attaching the external antenna onto the
EKI-6310GN; otherwise, damage might be caused to the EKI-6310GN itself.
EKI-6310GN User Manual
6
Advertisement
Table of Contents
