Huawei UPS5000-E Series User Manual page 60

UPS5000-E-(50 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Figure 2-41 Inserting and rotating the handle
Step 3 Place the handle back to the original position.
----End
II power supply II (ON) operation
Step 1 Check whether the ATS monitoring module has alarms. If an alarm exists, rectify the fault
first.
Step 2 Insert the handle into the switch panel. Press and hold red power button and turn the handle
clockwise in the direction of the arrow until the II sign indicates II (ON).
Figure 2-42 Inserting and rotating the handle
Step 3 Place the handle back to the original position.
----End
Issue 09 (2019-12-20) Copyright © Huawei Technologies Co., Ltd.
2 Overview
51