Huawei UPS5000-E Series User Manual page 50

UPS5000-E-(50 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Indicator
Tx/Rx
The home screen of the 8D controller displays status for the LN1 and LN2 power supplies,
electric generator, delay, and LLVD.




Figure 2-26 Status of the LN1 and LN2 power supplies
(1) LN1 power status
(3) LN1 power alarm ID
Figure 2-27 Generator status
Issue 09 (2019-12-20)
Name
Communication
indicator
Figure 2-26 shows the power status of LN1 and LN2.
status alarms.
Figure 2-27 shows the generator status.
Figure 2-28 shows the delay status.
Figure 2-29 shows the LLVD status.
If LN1 and LN2 power indicators are hollow, there is an alarm. Locate the fault based on the alarm ID
and Table 2-11 or the alarm ID description on the 8D controller, and rectify the fault.
Copyright © Huawei Technologies Co., Ltd.
Description
On: The ATS controller is sending data.
Table 2-11
(2) LN2 power status
(4) LN2 power alarm ID
2 Overview
describes the power
41