Huawei UPS5000-E Series User Manual page 175

UPS5000-E-(50 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
The Service Expert app can be downloaded from Huawei app store and can run on Android.
User interfaces displayed in this document correspond to the app version V100R001C00B055
and are for reference only.


If the initial startup verification passes, startup verification is not required afterwards.
After factory settings are restored, re-verification for startup is required.
Online Startup
Step 1 Insert a WiFi module into the USB port on the MDU.
Step 2 On the LCD, set System Info > Settings > Communication Settings > Password.
Step 3 Enable the mobile phone WLAN, search for the SSID signal, and connect to the WiFi signal.
Step 4 Open the Service Expert app on the mobile phone.
Step 5 On the home screen of the app, tap Startup to access the Set Startup screen.
Figure 5-5 Setting startup commissioning
Issue 09 (2019-12-20)
For offline startup, enter the barcode and the verification code on the mobile phone app.
The app automatically generates a startup password for the UPS. Then enter the password
on the LCD screen to start the UPS.
For online startup, activate the startup password on the mobile phone app to start the UPS.
Copyright © Huawei Technologies Co., Ltd.
5 Operations
166