Huawei UPS5000-E Series User Manual page 144

UPS5000-E-(50 kVA-125 kVA)
User Manual (Integrated UPS 3.0)


Intelligent Power Supply Settings
Figure 4-57 Intelli. Power screen
The default value of Intelligent power is Disable. If you select Enable, intelligent power
supply parameters are displayed.
Figure 4-58 Intelligent power supply parameters



Issue 09 (2019-12-20)
MUE07A DI_4
Corresponds to signal of the input dry contact DI_4 on the MUE07A.
MUE07A DI_5
Corresponds to signal of the input dry contact DI_5 on the MUE07A.
Intelligent power
Intelligent power supply mode is applicable when a D.G. is configured, which enables
D.G. power supply when an outage occurs. For details about the installation and
configurations, contact Huawei technical support.
ATS
Works with the intelligent power supply device.
D.G startup batt. volt. (V/cell)
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
135