Huawei UPS5000-E Series User Manual page 129

UPS5000-E-(50 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Figure 4-39 Advanced Param. screen 3
Figure 4-40 Advanced Param. screen 4






Issue 09 (2019-12-20)
System capacity (kVA)
Rated system capacity, equals to capacity of each power module multiplied by the
number of requisite power modules. The Module quantity mismatch alarm will be
generated if the setting is incorrect.
Power module capacity (kVA)
Rated power module capacity.
Requisite modules
Match the system capacity.
Redundant modules
Set in accordance with loading capacity and redundant requirements.
Working mode
The value can be Normal mode (default), Converter mode, Self-load mode, or ECO.
BSC mode
The value can be Non-BSC (default) or BSC mode. The latter is set when the
−
system is a dual-bus system.
A dual-bus system consists of one master and one slave BSC system, which are
−
specified by the customer. A BSC system cannot be the master and slave at the same
time. Specify master and slave systems during deployment. To change the setting,
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
120