Huawei UPS5000-E Series User Manual page 56

UPS5000-E-(50 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Figure 2-36 Pulling out the handle
If the handle is not pulled out, the automatic mode will be disabled.
Step 4 Flip the Motor/Manual selection lever to the Motor
Figure 2-37 Flipping the Motor/Manual selection lever
Step 5 Check whether the Power LED indicator is on, as shown by (1) in
Step 6 Check whether the Auto LED indicator is on.


Issue 09 (2019-12-20)
If the Auto LED indicator is off, the controller is working in the button mode, as shown
by (3) in Figure 2-38.
If the Auto LED indicator is on, press the Auto button once. Then the Auto LED
indicator turns off, and the controller enters the button mode, as shown by (2) in
2-38.
Copyright © Huawei Technologies Co., Ltd.
position.
Figure 2-38.
2 Overview
Figure
47