UPS5000-E-(50 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Table 5-7 Parameter description
Item
Site
Device Type
Link
IP
Port
Username
Password
Step 6 Tap Login after setting the parameters.
Step 7 After login, tap Power-on password activation on the screen. A message is displayed,
indicating whether to start the UPS. Tap OK.
Figure 5-6 Power-on password activation
----End
Issue 09 (2019-12-20)
Setting Method
Select the site as required.
Select the device that needs to be connected. Select UPS5000 in this
situation.
Enable the connection between the device and the WiFi network.
UPS IP address, which can be obtained from the LCD.
The port number is 443 by default and can be modified. If the UPS is
managed using the app, the port number must be set to 443.
admin
Changeme
Copyright © Huawei Technologies Co., Ltd.
5 Operations
167