Service Screen - Toro Groundsmaster 4300-D Service Manual

Hide thumbs Also See for Groundsmaster 4300-D:
Table of Contents

Advertisement

Service Screen

Groundsmaster
®
4300-D
16226SL Rev C
g189677
1.
Service screen (hours)
2.
Left/right button
3.
Down button
The service screen
(Figure
including hours and counts. If the correct passcode (PIN) has been entered
(refer to the Protected Menus in the
screen allows access to initiate a manual DPF regeneration, provides information
on DPF ash accumulation, and allows resetting the Service Due timer. To scroll
through the list of service records and view the current values, press the down
button (as indicated by the at the
To return to the previous screen, press the menu/back button (as indicated by
the
at the bottom of the screen).
Hours provides access to the following information:
Key On identifies the number of hours that the key switch has been in the
O
position.
N
Engine Run identifies the number of hours that the engine has been running.
PTO On identifies the number of hours that the machine has been operated
with the cutting decks engaged.
High Range identifies the number of hours that the machine has been
operated in H
(transport) speed range.
IGH
Service Due identifies the number of hours before the next scheduled
maintenance is due. This is a count down timer and the numbers of hours
displayed will decrease as the machine is used.
Service Reset (PIN required) identifies the total number of hours between
scheduled maintenance intervals. Reset the Service Due timer to the service
interval (250 hours) by pressing the left/light button (as indicated by the
the bottom of the screen) and then pressing the down button (as indicated by
the Yes or
at the bottom of the screen).
Counts provides access to the following information:
Engine Starts identifies the number of times that the engine has been started.
PTO Starts identifies the number of times that the PTO switch has been
engaged.
Figure 140
4.
Menu/back button
5.
Service items
140) contains operational information of the machine
Settings Screen (page
bottom of the screen).
Page 5–17
5–21)) the service
Electrical System: InfoCenter Display
at

Advertisement

Table of Contents
loading

Table of Contents