Installing The System Board - Toshiba Satellite L300 Maintenance Manual

4.9 System Board

Installing the System Board

Install the System Board, AC-IN Cable and ODD Extended Board according to the following
procedures and figure 4-16.
NOTE:
Be careful of the eject button for the PC card. It can be damaged when installing the
system board. Make sure it is pushed in.
1. Seat the system board in the correct position.
2. Secure the system board with two M2.5x6 black flat-head screws.
3. Connect the AC-IN cable to CN3 on the system board.
4. Connect the USB cable to CN14 on the system board.
5. Connect the power button board cable to CN1 on the system board.
6. Connect the CRT cable to CN4 on the system board.
Satellite L300 / L305/Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual
Downloaded from LpManual.com Manuals
4 Replacement Procedures
4-33