Work preparation
3.25 Programming cycles externally
3.25.1.45
CYCLE4071 - longitudinal grinding with infeed at the reversal point
Syntax
CYCLE4071(<S_A>, <S_B>, <S_W>, <S_U>, <S_I>, <S_K>, <S_H>, <S_A1>,
<S_A2>)
Parameters
No.
Function
The cycle is used for the execution of repeating infeeds. The infeed depth at the start and at the
end can be different. There is a tangential motion between the infeeds.
1130
Parameter
1
<S_A>
2
<S_B>
3
<S_W>
4
<S_U>
5
<S_I>
6
<S_K>
7
<S_H>
8
<S_A1>
9
<S_A2>
Data type
Meaning
REAL
Infeed depth at the start
REAL
Infeed depth at the end
REAL
Grinding width
REAL
Sparking-out time
REAL
Feedrate for infeed
REAL
Feedrate for transverse infeed
INT
Number of repetitions
AXIS
Infeed axis (optional) or 1st geometry axis
AXIS
Oscillating axis (optional) or 2nd geometry axis
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
NC programming