Write Online Tool Offset, Discrete (Putftoc) - Siemens SINUMERIK 840D sl Programming Manual

Syntax
PUTFTOCF(<Func>,<RefVal>,<ToolPar>,<Chan>,<Sp>)
Meaning
PUTFTOCF(...): Write online tool offset, continuously block-by-block using the polynomial function
<Func>:
<RefVal>:
<ToolPar>:
<Chan>:
<Sp>:
3.13.4.3

Write online tool offset, discrete (PUTFTOC)

Function
Using the predefined procedurePUTFTOC(...), an online tool offset is executed based on a
fixed offset value.
Syntax
PUTFTOC(<CorrVal>,<ToolPar>,<Chan>,<Sp>)
Meaning
PUTFTOC(...):
<CorrVal>:
<ToolPar>:
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
defined with FCTDEF(...)
Function number, defined in the function definition with FCTDEF(...)
Data type: INT
Range of val‐ 1, 2, 3
ues:
Reference value, from which the offset is to be derived (e.g. setpoint of an axis).
Data type: VAR REAL
Number of the wear parameter (length 1, 2 or 3) in which the offset value is to be
included.
Data type: INT
Number of the channel in which the online tool offset is to take effect.
Note:
Only required if the offset is not to take effect in the active channel.
Data type: INT
Number of the spindle for which the online tool offset is to take effect.
Note:
Only required if the offset is to be applied to a non-active grinding wheel rather than
the active tool that is currently in use.
Data type: INT
Write online tool offset
Offset value, which is added to the wear parameter.
Data type: REAL
Number of the wear parameter (length 1, 2 or 3) in which the offset value is to be
included.
Data type: INT
Work preparation
3.13 Tool offsets
753