Siemens SINUMERIK 840D sl Programming Manual page 1205

Operation Type
for explanations, see legend (Page 1197).
1) 2) 3) 4) 5)
CTABPOL
CTABPOLID
CTABSEG
CTABSEGID
CTABSEV
CTABSSV
CTABTEP
CTABTEV
CTABTMAX
CTABTMIN
CTABTSP
CTABTSV
CTABUNLOCK P
CTOL A
CTOLG0 A
CTRANS
CUT2D G
6)
CUT2DD G
CUT2DF G
CUT2DFD G
CUT3DC G
CUT3DCC G
CUT3DCCD G
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
Meaning
1)
F Number of polynomials already used in the
memory
F Number of the curve polynomials used by the
curve table with number n
F Number of curve segments already used in
the memory
F Number of the curve segments used by the
curve table with number n
F Returns the end value of the following axis of
a segment of the curve table
F Returns the starting value of the following axis
of a segment of the curve table
F Returns the value of the leading axis at the
end of the curve table
F Returns the value of the following axis at the
end of the curve table
F Returns the maximum value of the following
axis of the curve table
F Returns the minimum value of the following
axis of the curve table
F Returns the value of the leading axis at the
start of the curve table
F Returns the value of the following axis at the
start of the curve table
Revoke delete and overwrite lock
Contour tolerance for compressor functions,
orientation smoothing and smoothing types
Contour tolerance for rapid traverse move‐
ments
F Work offset for multiple axes
2D TRC
2½ D TRC in relation to the differential tool
2D TRC relative to the current frame (inclined
plane)
2½D TRC in relation to a differential tool rela‐
tive to the current frame (inclined plane)
3D TRC for circumferential milling
3D TRC for circumferential milling taking into
account a limitation surface with 3D radius
compensation Contour on the machining sur‐
face
3D TRC for circumferential milling taking into
account a limitation surface with differential
tool on the tool center-point path: Infeed to the
limitation surface
W TP SA Description see
2) 3) 4)
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
+/- +/- PM-NC
m +/- - PM-NC
m +/- - PM-NC
+/- - PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
Tables
4.1 Operations
5)
1205