G Group 64: Grinding Frames - Siemens SINUMERIK 840D sl Programming Manual

Tables
4.3 G commands
G command No.
1)
RMEBL 3
RMNBL 4
4.3.62

G group 64: Grinding frames

G command No.
1)
GFRAME[ 0 ] 1
GFRAME[ 1 ] 2
GFRAME[ 2 ] 3
... ...
GFRAME[ 10 101
0 ]
1)
2)
3)
4)
1266
Meaning
Repositioning to end of block
Repositioning to the nearest path point
Meaning
Active grinding frame in the channel $P_GFRAME =
Grinding frame of the data management $P_GFR[ 0 ]
(null frame)
Grinding frame of the data management $P_GFR[ 1 ]
Grinding frame of the data management $P_GFR[ 2 ]
Grinding frame of the data management $P_GFR[ 100 ]
Internal number (e.g. for PLC interface)
Configurability of the G command as a reset setting for the G group on power up, reset or end of part
program (with MD20150 $MC_GCODE_RESET_VALUES):
+ Configurable
- Not configurable
Effectiveness of the G command:
m modal
s Non-modal
Reset setting, see the following machine data:
● MD20149GCODE_RESET_S_VALUES (reset position of G groups (fix))
● MD20150 $MC_GCODE_RESET_VALUES (reset position of the G groups)
● MD20151GCODE_RESET_S_MODE (reset behavior of G groups (fix))
● MD20152 $MC_GCODE_RESET_MODE (reset behavior of G groups)
● MD20154 $MC_EXTERN_GCODE_RESET_VALUES (reset position of the G groups in ISO
mode)
● MD20156 $MC_EXTERN_GCODE_RESET_MODE (reset behavior of external G groups)
SAG Default setting Siemens AG
MM Default setting Machine Manufacturer (see machine manufacturer's specifications)
MD20150 W
2)
- s
- s
MD20150 W
2)
+ m
+ m
+ m
+ m
+ m
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
STD
3) 4)
SAG MH
STD
3) 4)
SAG MH
x
NC programming