Siemens SINUMERIK 840D sl Programming Manual page 1057

No. Parameter Parameter
mask internal
23
<_GMODE>
24
<_DMODE>
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
Data type Meaning
INT Geometrical mode (evaluation of programmed geometrical data)
UNITS:
TENS:
HUNDREDS:
THOUSANDS:
TEN THOUSANDS:
INT Display mode
UNITS:
TENS:
HUNDREDS:
THOUSANDS:
TEN THOUSANDS:
Work preparation
3.25 Programming cycles externally
Reserved
Reserved
Select machining or just calculation of
start point
0 = Compatibility mode
1 = Normal machining
Dimensioning of spigot acc. to center or
corner
0 = Compatibility mode
1 = Dimensioning via center
2 = Dimensioning of corner point,
spigot +L +W
3 = Dimensioning of corner point,
spigot -L +W
4 = Dimensioning of corner point,
spigot +L -W
5 = Dimensioning of corner point,
spigot -L -W
Complete machining or remachining
0 = Compatibility mode
1 = Complete machining
2 = Post machining
Machining plane G17/18/19
0 = Compatibility, the plane effective
before the cycle call remains ac‐
tive
1 = G17 (only active in the cycle)
2 = G18 (only active in the cycle)
3 = G19 (only active in the cycle)
--- Reserved
--- Reserved
--- Reserved
Technology scaling in cycle screen forms
(Page 1153)
0 = Input: Complete
1 = Input: Simple
1057