Constraints When Selecting A Transformation - Siemens SINUMERIK 840D sl Programming Manual

Work preparation
3.9 Transformations
Traversing from the pole with PTPG0 and TRANSMIT
Programming
N001 G0 X90 Z0 F10000 T1 D1 G90
N002 SPOS=0
N003 TRANSMIT
N010 PTPG0
N020 G0 X90 Y60
N030 X-90 Y-60
N040 X-30 Y-20
N050 X10 Y0
N060 X0 Y0
N070 X-20 Y2
N170 G1 X0 Y0
N160 X10 Y0
N150 X-30 Y-20
M30
3.9.12

Constraints when selecting a transformation

Function
Transformations can be selected via a part program or MDA. Please note:
● No intermediate movement block is inserted (chamfer/radii).
● Spline block sequences must be excluded; if not, a message is displayed.
● Fine tool compensation must be deselected (FTOCOF); if not a message is displayed.
718
PTP
CP 30
20
N070 X20 Y2
10
-30 -20 -10
-10
-20
-30
N060 X0 Y0
10 20 30
N050 X10 Y0
Comment
;Initial setting
;TRANSMIT transformation
; for each G0 block, automatically PTP –
and then CP again.
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
NC programming