Siemens SINUMERIK 840D sl Programming Manual page 1172

Work preparation
3.25 Programming cycles externally
No. Screen Cycle pa‐
form param‐ rameter
eter
2 Selection
S_KNUM
1172
Meaning
Correction of work offset (WO) or basic WO or basic reference
Val‐ UNITS:
ues:
TENS:
0 = No correction
1 to max. 99 numbers of the work offset or
1 to max. 16 numbers of the basic offset
HUNDREDS: Reserved
THOUSANDS: Correction of WO or basic or basic reference
0 = Correction of the adjustable WO
1 = Correction of the channel-specific basic WO
2 = Correction of the basic reference
3 = Correction of the global basic WO
9 = Correction of the active WO or for G500 in last active channel-specific basic WO
TEN THOUSANDS: Coarse or fine correction in the WO, basic WO or basic refer‐
ence
0 = Fine correction
1 = Coarse correction
6)
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
2)
NC programming