Work preparation
3.16 Axis couplings
Application examples:
● Flying workpiece transfer, e.g. to machine the rear side, transformation ratio: 1:1
● Multi-edge machining (polygonal turning), speed synchronism, transformation ratio: n
Syntax
COUPDEF(<FS>,<LS>,<ZFS>,<NLS>,<block change>,<coupling type>)
COUPON(<FS>,<LS>,<POSFS>)
COUPONC(<FS>,<LS>)
COUPOF(<FS>,<LS>,<POSFS>,<POSLS>)
COUPOFS(<FS>,<LS>)
COUPOFS(<FS>,<LS>,<POSFS>)
COUPRES(<FS>,<LS>)
COUPDEL(<FS>,<LS>)
WAITC(<FS>,<block change>,<LS>,<block change>)
924
①
Synchronize the speed
②
Transfer the workpiece
③
Machine the rear side
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
:n
1
2
NC programming