Siemens SINUMERIK 840D sl Programming Manual page 1273

Protection areas
Identifier Parameter
1.
CPROTDEF INT:
Number of the
protection
area
NPROTDEF INT:
Number of the
protection
area
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
2. 3.
BOOL: INT:
TRUE:
0:
Tool-related
4th and 5th
protection
parameters
area
are not evalu‐
ated
1:
4th parameter
is evaluated
2:
5th parameter
is evaluated
3:
4th and 5th
parameters
are evaluated
BOOL: INT:
TRUE:
0:
Tool-related
4th and 5th
protection
parameters
area
are not evalu‐
ated
1:
4th parameter
is evaluated
2:
5th parameter
is evaluated
3:
4th and 5th
parameters
are evaluated
4. 5.
REAL: Limit in REAL: Limit in
plus direction minus direc‐
tion
REAL: Limit in REAL: Limit in
plus direction minus direc‐
tion
Tables
4.4 Predefined procedures
Explanation
Definition of a channel-
specific protection area
Definition of a ma‐
chine-specific protec‐
tion area
1273