Holes1 - Row Position Pattern; Holes2 - Circle Or Pitch Circle Position Pattern - Siemens SINUMERIK 840D sl Programming Manual

3.25.1.3 HOLES1 – row position pattern
Syntax
HOLES1(<SPCA>, <SPCO>, <STA1>, <FDIS>, <DBH>, <NUM>, <_VARI>,
<_UMODE>, <_HIDE>, <_NSP>, <_DMODE>)
Parameters
No. Parameter Parameter
mask internal
1 X0
<SPCA>
2 Y0
<SPCO>
3 α0
<STA1>
4 L0
<FDIS>
5 L
<DBH>
6 N
<NUM>
7
<_VARI>
8
<_UMODE>
9
<_HIDE>
10
<_NSP>
11
<_DMODE>
3.25.1.4 HOLES2 – circle or pitch circle position pattern
Syntax
HOLES2(<CPA>, <CPO>, <RAD>, <STA1>, <INDA>, <NUM>, <_VARI>,
<_UMODE>, <_HIDE>, <_NSP>, <_DMODE>)
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
Data type Meaning
REAL Reference point for row of holes along the 1st axis (abs)
REAL Reference point for row of holes along the 2nd axis (abs)
REAL Basic angle of rotation (angle to 1st axis)
REAL Distance from 1st hole to reference point
REAL Spacing between the holes
INT Number of holes
INT Reserved
INT Reserved
STRING Hidden positions
[200]
● Max. 198 characters
● Specification of consecutive position numbers, e.g. "1,3" (positions
1 and 3 are not executed)
INT Reserved
INT Display mode
UNITS:
Work preparation
3.25 Programming cycles externally
Machining plane G17/18/19
0 = Compatibility, the plane effective
before the cycle call remains ac‐
tive
1 = G17 (only active in the cycle)
2 = G18 (only active in the cycle)
3 = G19 (only active in the cycle)
1027