Siemens SINUMERIK 840D sl Programming Manual page 1286

Tables
4.4 Predefined procedures
Master/slave coupling
Identifier Parameter
1. - n.
MASLON AXIS:
Axis identifier
MASLOF AXIS:
Axis identifier
MASLOFS AXIS:
Axis identifier
MASLDEF AXIS:
Axis identifier
MASLDEL AXIS:
Axis identifier
Online tool length offset
Identifier Parameter
1.
TOFFON AXIS:
Offset direc‐
tion
TOFFOF AXIS:
Offset direc‐
tion
SERUPRO
Identifier Parameter
IPTRLOCK
IPTRUNLOCK
Retraction
Identifier Parameter
1. - n.
POLFMASK AXIS:
Geometry or machine axis name
POLFMLIN AXIS:
Geometry or machine axis name
1286
Explanation
Switch on master/slave coupling
Separate master/slave coupling
Separate master/slave coupling and automatically brake slave spin‐
dles
Define master/slave coupling
The last axis is the master axis
Separate master/slave coupling and delete the definition of the group‐
ing
Explanation
2.
REAL: Activate online tool length offset in the specified offset direction
Offset value
in offset direc‐
tion
Reset online tool length offset in the specified offset direction
Explanation
Start of untraceable program section
End of search-suppressed program section
Explanation
Enable axes for rapid retraction
(without a connection between the
axes)
Enable axes for linear rapid retrac‐
tion
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
NC programming