Configure Alarm Triggered Recording; Configure Picture Capture - HIKVISION iDS-6716NXI-I/16S(B) Series User Manual

Step 6 Select the record type to Event.
Step 7 Set the schedule for the event triggered recording. Refer to Chapter 7.4 Configure Recording
Schedule for details.

7.8 Configure Alarm Triggered Recording

You can configure the recording triggered by the motion detection, facial detection, vehicle
detection, line crossing detection, etc.
Step 1 Go to System > Event > Normal Event > Alarm Input.
Step 2 Configure the alarm input and select the channel (s) to trigger the recording when alarm occurs.
Refer to Chapter 11 and Chapter 12 VCA Event Alarm for details.
Step 3 Go to Camera > Video Parameters.
Step 4 Set the event main stream/sub-stream recording parameters for the camera.
Step 5 Go to Storage > Schedule > Record.
Step 6 Select the record type to Alarm.
Step 7 Set the schedule for the alarm triggered recording. Refer to Chapter 7.4 Configure Recording
Schedule for details.

7.9 Configure Picture Capture

Purpose:
The picture refers to the live picture capture in continuous or event recording type.

Only iDS-9600NXI-I8/4F(B) series support this function.
Step 1 Go to Storage > Capture Schedule > Advanced.
Step 2 Set the picture parameters.
Resolution: set the resolution of the picture to capture.
Picture Quality: set the picture quality to low, medium or high. The higher picture quality
results in more storage space requirement.
Interval: the interval of capturing live picture.
Network Video Recorder User Manual
95