HIKVISION DS-7700NXI-I Series Quick Start Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Network Hardware
  5. DS-7700NXI-I Series
  6. Quick start manual

HIKVISION DS-7700NXI-I Series Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Network Video Recorder
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-7700NXI-I Series

Summary of Contents for HIKVISION DS-7700NXI-I Series

  • Page 1 Network Video Recorder Quick Start Guide...

  • Page 2: Table Of Contents

    Network Video Recorder Quick Start Guide TABLE OF CONTENTS Chapter 1 Panels Description ....................6 1.1 Front Panel ..........................6 1.2 Rear Panel ..........................7 1.2.1 DS-7700NXI-I/S Series ..................... 7 1.2.2 DS-7700NXI-I/P/S Series ....................8 1.2.3 DS-7600NXI-I/S ........................ 9 1.2.4 DS-7600NXI-I/P/S ......................10 Chapter 2 Installation and Connections ..................
  • Page 3 Network Video Recorder Quick Start Guide Quick Start Guide About this Manual This Manual is applicable to Network Video Recorder (NVR). The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
  • Page 4 Network Video Recorder Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 Network Video Recorder Quick Start Guide Applicable Models This manual is applicable to the model listed in the following table. Series Model DS-7716NXI-I4/4S DS-7700NXI-I/S DS-7732NXI-I4/4S DS-7716NXI-I4/16P/4S DS-7700NXI-I/P/S DS-7732NXI-I4/16P/4S DS-7608NXI-I2/4S DS-7600NXI-I/S DS-7616NXI-I2/4S DS-7632NXI-I2/4S DS-7608NXI-I2/8P/4S DS-7600NXI-I/P/S DS-7616NXI-I2/16P/4S DS-7632NXI-I2/16P/4S Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement...
  • Page 6 Network Video Recorder Quick Start Guide Safety Instructions Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

  • Page 7: Chapter 1 Panels Description

    Network Video Recorder Quick Start Guide Chapter 1 Panels Description Front Panel Front Panel The DS-7600NXI series only have one USB 2.0 port. Panel Description No. Name Function Description Solid white: HDD is abnormal. HDD indicator Flashing white: HDD is reading/writing. Unlit: No HDD is detected.

  • Page 8: Rear Panel

    Network Video Recorder Quick Start Guide Rear Panel DS-7700NXI-I/S Series Rear Panel Panel Description No. Name Description eSATA Connects external SATA HDD, CD/DVD-RM. Audio in RCA connector for audio input. Video out CVBS video output. RS-232 Connector for RS-232 device. Power supply 100 to 240 VAC power supply LAN1/LAN2...

  • Page 9: Ds-7700Nxi-I/P/S Series

    Network Video Recorder Quick Start Guide DS-7700NXI-I/P/S Series Rear Panel Panel Description No. Name Description Video out CVBS video output. eSATA Connects external SATA HDD, CD/DVD-RM. RS-232 Connector for RS-232 device. Audio in RCA connector for audio input. DB9 connector for VGA output. Display local video output and menu.

  • Page 10: Ds-7600Nxi-I/S

    Network Video Recorder Quick Start Guide DS-7600NXI-I/S Rear Panel Panel Description No. Name Description Audio out RCA connector for audio output. Audio in RCA connector for audio input. DB9 connector for VGA output. Display local video output and menu. Alarm in/out Connector for alarm input/output.

  • Page 11: Ds-7600Nxi-I/P/S

    Network Video Recorder Quick Start Guide DS-7600NXI-I/P/S Rear Panel Panel Description No. Name Description RJ-45 10/100 Mbps self-adaptive Ethernet interfaces. Audio out RCA connector for audio output. Audio in RCA connector for audio input. DB9 connector for VGA output. Display local video output and menu.

  • Page 12: Chapter 2 Installation And Connections

    Network Video Recorder Quick Start Guide Chapter 2 Installation and Connections Installation During installation of the NVR: Use brackets for rack mounting. Ensure ample room for audio and video cables. When routing cables, ensure that the bend radius of the cables are no less than five times than its diameter.

  • Page 13: Connections

    Network Video Recorder Quick Start Guide 1) Connect one end of data cable to the device motherboard. 2) Connect the other end of data cable to HDD. 3) Connect one end of power cable to HDD. 4) Connect the other end of power cable to the device motherboard. Connect Cables Set the device up, match HDD screw threads with the reserved holes on the device bottom, and fix HDD with screws.

  • Page 14: Alarm Output Wiring

    Network Video Recorder Quick Start Guide Alarm Input Wiring Alarm Output Wiring To connect to an alarm output (AC or DC load), use the following diagram: Alarm Output Wiring For DC load, the jumpers can be used within the limit of 12V/1A safely. To connect an AC load, jumpers should be left open (you must remove the jumper on the motherboard in the NVR).

  • Page 15: Controller Connection

    Network Video Recorder Quick Start Guide Controller Connection Controller Connection To connect a controller to the NVR: Disconnect pluggable block from the KB terminal block. Unfasten stop screws from the KB D+, D- pluggable block, insert signal cables into slots and fasten stop screws.
  • Page 16 Network Video Recorder Quick Start Guide Bit Rate Storage Used 128K 160K 192K 224K 256K 112M 320K 140M 384K 168M 448K 196M 512K 225M 640K 281M 768K 337M 896K 393M 1024K 450M 1280K 562M 1536K 675M 1792K 787M 2048K 900M 4096K 1.8G 8192K...

  • Page 17: Chapter 3 Menu Operation

    Network Video Recorder Quick Start Guide Chapter 3 Menu Operation Start up Your Device Proper startup and shutdown procedures are crucial to expanding the life of the NVR. To start your device: Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.

  • Page 18: Configure Unlock Pattern For Login

    Network Video Recorder Quick Start Guide We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

  • Page 19: Log Into The System

    Network Video Recorder Quick Start Guide Draw the Pattern Connect at least 4 dots to draw the pattern. Each dot can be connected for once only. Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured successfully.

  • Page 20: Enter Wizard To Configure Quick Basic Settings

    Network Video Recorder Quick Start Guide Login Interface Input Password. Click Login to log in. In the Login dialog box, if you enter the wrong password 7 times, the current user account will be locked for 60 seconds. Enter Wizard to Configure Quick Basic Settings The Setup Wizard can walk you through some important settings of the device.

  • Page 21: Network Settings

    Network Video Recorder Quick Start Guide Network Settings Purpose Network settings must be properly configured before you operate device over network. Go to System > Network > TCP/IP. Network Settings Select the General tab. In the General Settings interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server.

  • Page 22: Start Live View

    Network Video Recorder Quick Start Guide Click on the main menu bar to enter the Camera Management. Click the Custom Add tab on the title bar to enter the Add IP Camera interface. Add IP Camera Enter IP address, protocol, management port, and other information of the IP camera to add. Enter the login user name and password of the IP camera.

  • Page 23: One-Touch Raid Configuration

    Network Video Recorder Quick Start Guide Live View You can use the toolbar at the window bottom to realize the capture, instant playback, audio on/off, digital zoom, live view strategy, show information and start/stop recording, etc. One-Touch RAID Configuration Purpose: The device supports the RAID storage function.

  • Page 24: Recording Settings

    Network Video Recorder Quick Start Guide If you install 4 or more HDDs, a hot spare disk for array rebuilding will be created. A message box will pop up when the array creation is completed, click OK on it. Optionally, the device will automatically initialize the created array. Go to Storage > RAID Setup >...

  • Page 25: Playback

    Network Video Recorder Quick Start Guide Record Schedule Select a day and click-and-drag the mouse on the time bar to set the record schedule. Click Apply to save the settings. Playback The recorded video files on the hard disk can be played back in the following modes: instant playback, all-day playback for the specified channel, and playback by normal/important/custom/event/smart/tag/sub-periods/external file search.
  • Page 26 Network Video Recorder Quick Start Guide Playback Interface Select the channel(s) to or execute simultaneous playback of multiple channels.

  • Page 27: Chapter 4 Access By Web Browser

    Network Video Recorder Quick Start Guide Chapter 4 Access by Web Browser You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.
  • Page 28 Network Video Recorder Quick Start Guide If the device is already activated, enter the user name and password in the login interface, and click the Login button. Login Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in.
  • Page 29 Network Video Recorder Quick Start Guide UD10500N...

This manual is also suitable for:

Ds-7700nxi-s seriesDs-7700nxi-p seriesDs-7600nxi-i seriesDs-7600nxi-s seriesDs-7600nxi-p seriesDs-7716nxi-i4 ... Show all

Table of Contents