Configure Alarm Triggered Recording - HIKVISION DS-7100NI-K1/W/M Series User Manual

4) Click Settings, and the message box for channel information pops up.
1. Select the channels which you want the motion detection event to trigger recording.
2. Click Apply to save the settings.
3. Click OK to back to the upper level menu.
4. Exit the Motion Detection menu.
3. Edit the Motion Detection Record Schedule. For the detailed information of schedule
configuration, see Configure Recording Schedule.

4.4 Configure Alarm Triggered Recording

Follow the procedure to configure alarm triggered recording.
Steps
1. Go to Menu → Configuration → Alarm.
Network Video Recorder User Manual
Figure 4-12 Motion Detection Handling
48