Network Play Setting - Sega After Burner Climax Owner's Manual

21-3 NETWORK PLAY SETTING

When the power has been engaged, initialization takes place automatically. If
anyone is near the product, they could come in contact or collide with it. Check
carefully to be sure that no one is near the product and that no tools or items have
been left on the product, then engage the power.
Upon completion of initialization, call up the network check screen and check
connections and settings for network play. If the network check screen appears
continuously on one machine, an error message is displayed. The power must be
re-engaged and the test mode must be established and terminated once.
Set the two game machines for network play. If the setting is incorrect, network play cannot be implemented.
1
Power up the two game machines for network play. Wait for proper completion of initialization.
2
Put the two game machines in test mode. (See chapter 9.)
3
Select GAME TEST MODE and press the TEST Button. Game test mode is established and the game test
mode menu appears. shouwn as below.
FIG. 21-3a
4
On the network play setting screen, set LINK NUM. Press the SERVICE Button, move the cursor onto
LINK NUM and press the TEST Button.
21
157