Sega After Burner Climax Owner's Manual page 96

Calibration Select Screen
Shown below is the recommended range in the value for the center position of
each volume. Attach volume so that its value is within this range. [Throttle lever:
9
80H ± 4H]
<Operation>
1
Press the SERVICE Button and move the cursor to the item you want to select.
2
When the TEST Button is pressed, the calibration screen for the selected item appears.
3
Adjust the input values on the calibration screen.
4
The calibration select screen reappears.
5
Press the SERVICE Button and move the cursor to EXIT.
6
When the TEST Button is pressed, the calibration screen reappears.
<Menu Explanation>
CONTROL STICK:
THROTTLE LEVER:
EXIT:
90
FIG. 9-4e03 CARIBRATION SELECT Screen
Proceed to the control stick calibration screen.
Proceed to the throttle lever calibration screen.
Return to the calibration screen.