Sega After Burner Climax Owner's Manual page 38

8
After placing the coin frame in the coinchute tower correctly, install
the proper coin select bracket. 4 M4 nuts are used.
6
9
Assemble the coin selector harness. The wire with the 'Coin 1' tag connects to the coin selector,
the wire with the 'Lamp 1' tag connects to the lamp as shown below. (When using a different
coin door, the installer may cut the existing connector and use a proper connector.)
10
Insert the cash box into the lower part of the coin frame. Look for any interferences or tightness.
32
Nut(4), Black
M4, Spring & Flat Washer Used
Coin Select Harness
Coin Select Bracket
(1 Entry or 2 Entry)
Power Specifi cation by Line Color
Power Specifi cation by Line Color