5
ATTACHMENT OF MOTION STOP BUTTON GUIDE
The MOTION STOP BUTTON guide that will be attached to the SW PLATE of the CONTROL PANEL must be at-
tached in the following order.
1
Remove 4 ROUND HEAD WRENCH BOLTS (M4 X 12) that hold down the
6
SW PLATE to the CONTROL PANEL and separate the SW PLATE .
Round Head Wrench Screw(6
M4 X 12
2
Disconnect the CONNECTORS connected to the MICRO SW as shown in fi gure 6-5b. Look
at fi gure 6-6c and turn the MICRO SW in the counter clockwise direction to remove it.
38
Connector (4P)
FIG. 6-5b
FIG. 6-5a
MICRO SW
FIG. 6-5c