Motion Test - Sega After Burner Climax Owner's Manual

c. MOTION TEST
When this screen is displayed, the seat can be operated. Make sure that no one is
around and be careful during this procedure.
9
Select the Test Mode on the main screen and move on to the MOTION TEST Menu. The following screen will ap-
pear.
<Operation>
1
Lock the SEAT BELT and check for any objects on the FLOOR SENSOR. If the SEAT BELT is unlocked
or if objects are found on the FLOOR SENSOR the SEAT will not operate.
2
Press the SELECT BUTTON, move the cursor to the desired menu and select it.
3
The unit will operate while the SET BUTTON is pressed, and when it reaches a LIMIT is will stop
operating. .
4
When the TEST is completed, press the SELECT BUTTON, move the cursor to [EXIT]and select it.
5
When the SET BUTTON is pressed, the message [PLEASE POWER OFF AND POWER ON] is displayed.
Turn the power OFF and re-engage the power..
102
MOTION CONTROL BD

MOTION TEST

LEFT UP
LEPT DOWN
RIGHT UP
RIGHT DOWN
> EXIT
STATUS CODE : [LEFT] XXXX, [RIGHT] XXXX CAN : (EFF=XXX.X)
POSITION : [LEFT]XXXX [RIGHT]XXXX
SEAT BELT : LOCK
FLOOR SENSOR : OFF
MOTION STOP BUTTON : OFF
SELECT WITH SELECT BUTTON
AND PRESS SET BUTTON
FIG. 9-4c01 MOTION TEST Screen