Actuator - Sega After Burner Climax Owner's Manual

4
Wipe off excess grease
5
Do a MOTION TEST in the MOTION CONTROL BD TEST MODE to make sure GREASE is spread out
evenly.
6
Replace the SEAT REAR COVER and SEAT into its original position.
b. ACTUATOR
1
Take out 9 Truss Bolts M5×16 that hold down the front cover and separate the FRONT COVER.
Truss Bolt(9)
M5 X 12, Plastic Washer Used
Front Cover
FIG 15-2b01
2
Use the GREASE GUN to apply 60g to the GREASE NIPPLE of the
ACTUATOR(TOP), and 30g to the BEARING HOUSING.
FIG 15-2b02 ACTUATOR Piston
FIG 15-2b03 Bearing Housing
15
133