3
REMOVAL OF BELLOWS BRACKET
1
Un-zip the zipper below the back side of the monitor. Detach the pin bush from the wire connection pin.
16
2
Remove truss screws and fl ush screws from the base and cabin.
Remove the bellows
< Checking the bellows >
■ Check the tightness of the fastening bolts on the bellows bracket weekly.
■ Check for de-formation or damage of exterior of the bellows and bellows bracket daily.
138
Zipper
Truss Screw(4), Black
M5 X 20
Base: Truss Screw(34), Black
M5 X 12
Cabin : Truss Screw(30), Black
M5 X 12
FIG 16e
FIG 16d
Flush Screw(5)
M5 X 12