21．Network Play; 21−１ Precautions Regarding Network Play Setup - Sega AV F-ZERO AX Owner's Manual

21. NETWORK PLAY
Up to 4 machines can be linked for network play. Properly connected network cables and
correct network play settings are required for network play.
21 − 1 PRECAUTIONS REGARDING NETWORK PLAY SETUP
● Before starting to work, ensure that the Power SW is OFF. Failure to
observe this can cause electric shock or short circuit.
● Use care so as not to damage wirings. Damaged wiring can cause
electric shock or short circuit.
● Do not touch undesignated places. Touching places not designated
can cause electric shock or short circuit.
● This work should be performed by the site maintenance individual or
other skilled professional. Performing work by non-technical personnel
can cause electric shock hazard.
● When linking a number of machines, be sure to supply sufficient power
for the corresponding number of machines. Be sure to secure per
machine current as stated in this manual. Failure to observe this can
cause a fire and an electric shock accident.
● Due to the length of the network cable, the distance in between the
machines is limited. However, to avoid accidents, be sure to secure
space in excess of 70 cm between the machines.
● To perform work safely and avoid serious accident such as the
cabinet's falling down, do not perform work in places where step-like
grade differences, a ditch, or slope exist.
● To perform work safely, be sure to secure the space corresponding to
number of machines to be linked. Failure to observe this can cause
accident.
● To avoid accidents, use a cable cover that will not cause patrons to trip
when laying network cables in areas of heavy foot traffic.
● To prevent accidents and acts of vandalism, cover the network cables
with the strongest cover possible.
Network play is not possible between game machines with different
cabinet types.
When connecting several games machines together, make sure that a sufficient amount of
electrical power is available for each machine. Plan on providing 15A for each machine in 100-
120V locations, and 7A in 220-240V locations.
− 174 −