Sega After Burner Climax Owner's Manual page 62

Precautions in Moving Loads
• This product weighs over 625 kg. It cannot be lifted by human strength alone.
Trying to do so could cause accidents. Use a crane or other powered hauling
unit to move the product.
7
• When moving a load, insert buffer material between the base and the platform
wall and attach the product securely to the platform with rope or other means. If
exterior parts are damaged or deformed, there could be electrical shocks and/
or short circuits.
• A minimum of 8 persons is needed to load this machine onto a forklift truck. The
procedure cannot be carried out safely with fewer than this number.
• The forklift should have a platform of at least 1,500 mm in length. The procedure
cannot be carried out safely with a platform shorter than this.
• Do not push or support the monitor, control stick, throttle lever or plastic
components while moving or loading the product. Otherwise these components
could be damaged, resulting in injuries from fragments, cracks, etc.
• When transporting the unit by truck, etc., do not secure it with rope, etc., in any
position other than as illustrated. Otherwise components could be damaged,
resulting in injuries from fragments, cracks, etc. Also protect amply with cloth,
etc., those areas contacted by rope, etc.
• When placing the machine onto a platform or onto the ground, lower it slowly in
an upright, level position. If the machine is lowered at an angle, the weight may
be distributed unevenly and damage to casters/adjusters may result.
• Do not have adjustors contact the fl oor on the platform. Otherwise they could
be damaged or deformed by tilts or vibrations during transport.
• Make sure that the product will not undergo violent oscillations. Lay out a
vibration-proof mat, for instance, and place the product on top of it.
56