• Handle molded parts with care. Excessive weight or pressure may cause them
to break and the broken pieces may cause injury.
• When attaching or removing doors or lids, be careful that your hand or fi nger
does not get caught in anything.
Be careful not to damage parts surfaces. In some cases, if such surfaces are
damaged, the part must be replaced; it cannot be reinforced or repaired.
Installation and assembly of this product should take place in the following sequence.
1
FIXATION TO INSTALLATION SITE
2
SIDE STEP INSTALLATION
3
FENCE INSTALLATION
4
COINCHUTE TOWER INSTALLATION
5
ATTACHMENT OF MOTION STOP BUTTON GUIDE
6
PREPARATION FOR INSTALLATION
7
CONNECTION OF POWER AND GROUND
8
SOFTWARE INSTALLATION
9
ENGAGEMENT OF POWER SUPPLY AFTER INSTALLING SOFTWARE
10
CORNFIRMATION OF ASSEMBLY
6
21