Sega After Burner Climax Owner's Manual page 29

1 FIXATION TO INSTALLATION SITE
Make sure that all the adjusters contact the fl oor. Otherwise the cabinet could
move, causing an accident.
The product comes with casters attached at 4 locations and adjusters at 6 locations (Fig. 6-1a). When the installation
site has been determined, have the adjusters come in direct contact with the fl oor. Establish a gap of about 5 mm
between the fl oor and the casters and adjust the unit so that it will remain level.
1
Move the product to the installation site. If the product is to be installed near a wall, secure enough
passageway space for players to access the seat.
2
Use a wrench to set adjuster heights so that the unit will stay level.
3
After setting, turn adjuster nuts upwards to tighten them and secure adjuster heights.
Caster 4EA
Adjuster 6EA
Adjuster
FIG. 6-1b Illustration of Adjuster Setting
FIG. 6-1a Bottom View
Caster
Fix Nut
6
23