3
Wipe off excess grease..
4
Do a MOTION TEST in the MOTION CONTROL BD TEST
MODE to make sure GREASE is spread out evenly.
5
Replace the FRONT COVER into its original position.
15
c. UNIVERSAL JOINT IN THE ACTUATOR
1
Follow the same procedures of number 1 of ACTUATOR GREASE UP.
2
Apply 5g to the top and bottom of the UNIVERSAL JOINT in the ACTUATOR.
FIG 15-2c01 Top of UNIVERSAL JOINT
3
From hereon, follow instructions 3,4,5, of ACTUATOR GREASE UP.
134
FIG 15-2c02 Bottom of UNIVERSAL JOINT