Network Setting (Core) - Sega House Of The Dead 3 DELUXE Service Manual

5.2.9. NETWORK SETTING (CORE)

Use the LAN PORT attached to the Main Board, and carry out the settings necessary for network
communication.
*This game does not support network communication connections. *
(1) Use the SERVICE Button to move the cursor to the desired test item.
(When setting IP ADDRESS, SUBNET MASK, GAME WAY or PRIMARY DNS, use the underline as
a guide.)
(2) Press the TEST Button to change the setting.
(3) Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.
(A) REMOTE (C)
This sets up whether a communication setting is automatic or manual.
ENABLE: Sets the communication setting automatically.
DISABLE: Sets the communication setting manually.
(B) IP ADDRESS (C)
This is one of the settings required for communication network. After setting the number, press TEST
Button on SET position to memorize the setting. If you set the REMOTE setting to ENABLE, you
cannot select this.
(C) SUBNET MASK (C)
This is one of the settings required for communication network. After setting the number, press TEST
Button on SET position to memorize the setting. If you set the REMOTE setting to ENABLE, you
cannot select this.
(D) GATE WAY (C)
This is one of the settings required for communication network. After setting the number, press TEST
Button on SET position to memorize the setting. If you set the REMOTE setting to ENABLE, you
cannot select this.
(E) PRIMARY DNS (C)
This is one of the settings required for communication network. After setting the number, press TEST
Button on SET position to memorize the setting. If you set the REMOTE setting to ENABLE, you
cannot select this.
(F) CURRENT
This displays the present setting value during a set-up of each item [(B), (C), (D), (E)]. Pressing TEST
Button on SET position, the settings are memorized and the screen is changed.
T
HIS OPTION IS FOR POSSIBLE FUTURE GAMES ONLY
S
ELECT EXIT AND GO DIRECTLY TO THE NEXT TEST MODE
58
.
.