Sega After Burner Climax Owner's Manual page 36

4 COINCHUTE TOWER INSTALLATION
Various types of coinchute tower can be attach to this product. For japanese customers, we recommend Asahi Seiko,
for the customers outside of Japan, we recommend Happ's frame(No. 42-3272-00) and accessories.
6
4-1 ASSEMBLING THE COIN MECHANICS
Coin mechanics such as coinchute doors, cash box doors and etc. must be
mechanically compatible with Asahi Seiko and Happ's frames.
Coin mechanics must be completely assembled to fi nish coinchute tower assembly. Below is the assembly instruction
for Happ's coin mechanics.
Assembling the Coin Frame (Asahi Seiko)
1
Clips noted as
2
Attach the coin frame to the coin vault using 4 M4 X 8 round head screws(disassemble
the 5 clips on the lower side and 1 clip on the upper side if the clips are already attached
to the coin frame. Coin vault cannot be attached if the clips are attached.)
3
Assemble the clips facing down as shown below when the coin vault is assembled.
Fasten the clips just enough so the clips can be moved freely.
A
30
(out of 10 clips) are not used when using Asahi Seiko's coin frame.
A
Clip
Round Head Screw(4)
M4 X 8, W/Spring & Flat Washers
Coin Frame
Coin Vault
Clip