Sega After Burner Climax Owner's Manual page 33

8
Hang the side step on the temporarily assembled guides. Make sure the sensor lines are pushed in to the base
so the lines are not jammed under the steps.
9
Place the adjusters of the Side step fence on the fl oor, and fasten the adjusters
using the fi x nut. Be careful not to lift the adjusters too far up. Do the same
for the other side. Picture below shows the completed side step.
Hex Bolt(6), Black
M8 X 25, W/Spring & Flat Washers
FIG. 6-2g
Fix Nut
Adjuster
FIG. 6-2h
6
27