CONNECTIONS FOR NETWORK PLAY
To enable network play, the hubs inside each of the master game machines must be connected with
network (LAN) cables. Connect the hub inside the master machine to each of the hubs inside the other
machines.
Do not make the LAN connections between this game and another game of a different type.
1.
Turn the power off and unplug the power cord from the outlet. Place the power cord so as not to
damage it while working.
2.
Move the machines so that they are aligned as explained in section 20 of this manual. Leave
enough space at the rear and the sides of the machine so that work can be performed safely.
3.
Remove the back door(s) of the master units and feed a LAN cable between each hub (as
shown in the diagram on previous page).
4.
Feed the excess cable back into the machine or lay cable cover as to not cause a tripping
hazard.
From Cab 1
To Cab 2
65