Sega -RaceTV Owner's Manual
  1. Manuals
  2. Brands
  3. Sega Manuals
  4. Arcade Game Machines
  5. SEGA-RaceTV
  6. Owner's manual
Sega -RaceTV Owner's Manual

Sega -RaceTV Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
420-7108-01UK
1
ST
PRINTING
AMUSEMENTS EUROPE LTD
Block C, 42 Barwell Business Park, Chessington, SURREY. KT9 2NY. United Kingdom.
TEL: +44 (0)208 391 8090. FAX: +44 (0)208 391 8099
© SEGA
All manufacturers, cars, names, brands and associated imagery featured in this game are trademarks and/or
copyrighted materials of their respective owners. All rights reserved.
OWNER'S MANUAL
IMPORTANT
• Before using this product, read this manual carefully to understand the
contents herein stated.
• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.

Advertisement

Table of Contents
loading

Related Manuals for Sega SEGA-RaceTV

Summary of Contents for Sega SEGA-RaceTV

  • Page 1 • Before using this product, read this manual carefully to understand the contents herein stated. © SEGA • After reading this manual, be sure to keep it near the product or in a All manufacturers, cars, names, brands and associated imagery featured in this game are trademarks and/or convenient place for easy reference when necessary.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS .................. INTRODUCTION ....................v HANDLING PRECAUTIONS ................. 1 PRECAUTIONS REGARDING INSTALLATION LOCATION ......5 2-1 LIMITATIONS OF USAGE ....................5 2-2 OPERATION AREA ......................6 PRECAUTIONS REGARDING PRODUCT OPERATION ......
  • Page 3 TEST MODE ....................43 9-1 SWITCH UNIT AND COIN METER ................44 9-2 SYSTEM TEST MODE ....................46 9-3 GAME TEST MODE .......................47 9-3-1 GAME TEST MODE Menu ..................47 9-3-2 INPUT TEST ......................48 9-3-3 OUTPUT TEST ......................49 9-3-4 FORCE FEEDBACK .....................50 9-3-5 INPUT ASSIGNMENTS ..................51 9-3-6 GAME ASSIGNMENTS ..................55 9-3-7 BOOKKEEPING ....................57 9-3-8 BACKUP DATA CLEAR ..................59...
  • Page 4 COMMUNICATION PLAY ................101 19-1 INSTALLATION PRECAUTIONS ................101 19-2 CONNECTING THE COMMUNICATION CABLE ............103 19-3 NETWORK PLAY SETTINGS ..................106 19-4 NETWORK PLAY PRECAUTIONS ................107 19-5 ATTACHING SATELLITE NUMBER STICKERS ............108 DESIGN-RELATED PARTS ............... 109 PARTS LIST ....................110 WIRE COLOR CODE TABLE ..............140 WIRING DIAGRAM ..................

  • Page 5: Introduction

    “IMPORTANT” and the symbol below. Indicates important information that, if ignored, may result in the mishandling of the product and cause faulty operation or damage to the product. Sega Amusements �.S.A., Inc. 800 Arthur Avenue, Elk Grove Village, IL 60007-5215, U.S.A. TEL:...
  • Page 6 Definition of 'Site Maintenance Personnel or Other Qualified Individuals' Procedures not described in this manual or marked as 'to be carried out by site maintenance personnel or other qualified professionals' should not be carried out by personnel without the necessary skill or technology. Work carried out by unqualified persons may cause serious accidents, including electrocution.

  • Page 8: Handling Precautions

    - SEGA shall not be held responsible for damage, compensation for damage to a third party, caused by specification changes not designated by SEGA.
  • Page 9 • Some parts are not designed and manufactured specifically for this game machine. The manufacturers may discontinue, or change the specifications of such general-purpose parts. If this is the case, SEGA cannot repair or replace a failed game machine whether or not a warranty period has expired.
  • Page 10 CONCERNING THE WARNING LABELS This SEGA product has stickers attached describing the product manufacture No. (Serial This SEGA product has warning displays on No.) and Electrical Specifications. It also has a stickers, labels and/or printed instructions Sticker describing where to contact for repair adhered/attached to or incorporated in the and for purchasing parts.
  • Page 11 440-CS0186-EG 440-DS0013XEG SEE A 440-WS0002XEG SEE A Serial No. Display Electrical Specifications Display...

  • Page 12: Precautions Regarding Installation Location

    2 PRECAUTIONS REGARDING INSTALLATION LOCATION This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, injury and/or malfunction. - Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and/or shower, etc.

  • Page 13: Operation Area

    • Be sure to provide sufficient space specified in this manual. Do not allow objects to block the ventilation ports. It can cause generation of heat and a fire. • SEGA shall not be held responsible for damage or compensation for damage to a third party, resulting from the failure to observe this instruction.

  • Page 14: Precautions Regarding Product Operation

    3 PRECAUTIONS REGARDING PRODUCT OPERATION To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players In order to avoid accidents, check the following before starting the operation: To ensure maximum safety for the players and the customers, ensure that where the product is operated has sufficient lighting to allow any warnings to be read.
  • Page 15 ● During daily cleaning be sure to check the surface of the steering wheel, gear shifter and other parts that that the player touches with his hands for damage, cracks or loose screws. If a player uses the machine while it is damaged, cracked or has a loose screw, the player may become injured.
  • Page 16 PAYING ATTENTION TO CUSTOMERS DURING OPERATION To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players. ● For safety reasons, do not allow any of the following people to play the game. ・Those who need assistance when walking. ・Those who have high blood pressure or heart problems.
  • Page 17 ● Customer should be warned not to place children on their lapswhile they play the game. Doing so may cause the child to become trappedbetween the player and the control panel and/or cause the machine to tip over. Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or cause the cabinet to fall over, resulting in injury.

  • Page 18: Part Descriptions

    4 PART DESCRIPTIONS Images may differ from the product.

  • Page 19: Accessories

    5 ACCESSORIES Confirm that the accessories list in the table below are present when setting up the product. Accessories marked “Spare” in the note column are consumeable items but included as spares. TABLE 5a - ACCESSORIES DESCRIPTION OWNERS MAN�AL PT N�MBER (QTY) 420-��0� (�) NOTE This Manual �EY MASTER Parts not labeled with part numbers are as 220-5�93-2-A00� (2) yet unregistered or cannoty be registered. For opening/closing Be sure to handle all parts with cars, as some the doors parts are not available for purchase as seperate items.
  • Page 20 Confirm that the accessories list in the table below are present when setting up the product. Accessories marked “Spare” in the note column are consumeable items but included as spares. TABLE 5b - ACCESSORIES VOL�MN MICROSWITCH 220-54�4 or 220-5�53 (�) 509-5�04 (�) SATELLITE N�MBER STIC�ER RTV-0005 (�) STIC�ER 42�-�30�-�25 (�) DVD WIRE FOR LINDBERGH RED (2 m) 605-0094-0� (�) For software installation, see chapter 6 [�]. NOTE: �se the (2 m) wire included with this product, and not the (�...

  • Page 21: Asssembly And Installation

    6 ASSEMBLY & INSTALLTION • This work should be carried out by site maintenance personnel or other qualified professionals. Work performed by non-technical personnel can cause a severe accident such as electric shock. Failing to comply with this instruction can cause a severe accident such as electric shock to the player during operation.
  • Page 22 Installation and assembly of this product should take place in the following sequence. 6-1　INSTALLATION AND SECURING IN PLACE 6-1-2　INSTALLING THE AC COVERS 6-1-3　ATTACHING THE FRONT DESIGN PLATE 6-1-4　SECURING IN POSTION 6-2　ATTACHING THE DVD & KEY CHIP 6-3　CONNECTING THE POWER AND GROUND 6-4　TURNING THE POWER ON 6-4　CHECKING THE ASSEMBLY - SET UP...

  • Page 23: Installation And Securing In Place

    6-1　INSTALLATION AND SECURING IN PLACE ONLY QUALIFIED SERVICE PERSONNEL should carry out this operation Place the two cockpits side by side. Position the � player cabinet, which has the IEC inlet at the left hand side when viewed facing the monitor Sticker “L” is placed on the back of the � player cabinet and Sticker “R” is placed on the 2 player cabinet.

  • Page 24: Installation Of The Ac Covers

    6-1-2　INSTALLATION OF THE AC COVERS ONLY QUALIFIED SERVICE PERSONNEL should carry out this operation BE SURE THAT THE MACHINE IS NOT CONNECTED TO THE MAIN SUPPLY BEFORE ATTEMPTING THIS OPERATION. The AC Wire Covers are used for protecting the interconnecting wiring and the CAT5 LAN cable. When carring out this operation be careful not to trap and wires between the covers. Pay attention when handling the CAT5 Lan cable as excessive bending will cause damage.

  • Page 25: Assemble Front Design Plate

    6-1-3　ASSEMBLING FRONT DESIGN PLATE The FRONT DESIGN PLATE attaches to the ASSY BILLBOARD. Please follow these instructions to secure in place. The FRONT DESIGN PLATE is located within the ASSY INSTALLATION �IT. Carefully remove the portective and offer up the the front side of the ASSY BILLBOARD. Remove the 4 fixings from the Billboard Box.

  • Page 26: Securing In Position

    6-1-4　SECURING IN POSITION RACE TV consists of two individual Game Consels, each consol being fitted with four Castors and four Adjusters. (See 6-2 Fig 01). Both consols are joined together via a central Coin/Credit consol making up the ‘Twin’ unit,. Upto four Twin units may be coupled together for the Multi Player game,. If several machines are to be installed, refer to Chapter 19 Move the product to the installation point..

  • Page 27: Attaching The Dvd Drive And Key Chip

    6-2　ATTACHING THE DVD DRIVE AND KEY CHIP PLEASE NOTE: The software is already loaded on to LINDBERGH and the KEY CHIP fitted at the factory. IF there is a problem with the software or LINDBERGH, then the following information is provided to re-load software on to replaced LINDBERGH. ADVD drive is availavle from STS. Remove the two ‘TRUSS SCREWS’...
  • Page 28 6-2　ATTACHING THE DVD DRIVE AND KEY CHIP 6 Connect the DVD Wire ( Metres) to the LINDBURGH connect the connector on the side with the LINDBURGH tag. The ‘USB MINI A’ can be connected to any of th ports  - , This manual shows ig being connected to Port #. (See - Fig 08) 7 Take the other end of the DVD wire (m) the end with the DVD tag and pass Pass...

  • Page 29: Connecting Power And Ground

    6-3　CONNECTION OF POWER AND GROUND • Use the power supply equipped with an earth leakage breaker. Use of power supply without such a breaker could result in fire if there is a current leakage. • This product MUST be EARTHED. Ensure that the unit is properly connected to the INDOOR GROUND.
  • Page 30 6-3　CONNECTION OF POWER AND GROUND The accessory power cord has a ground wire inside it. Connect the power cord to the AC unit then insert the power cord plug into a “power outlet with ground terminal.” If there is no “power outlet with ground terminal,” be sure to establish ground by some other means;...

  • Page 31: Turning The Power On

    6-4 TURNING POWER ON - SOFTWARE INSTALLATION • Be careful not to damage the DVD wire by getting it caught between objects, etc. Doing so may cause a short circuit or fire. • The following explanation assumes that the product has been assembled properly as explained above. If there is an error or if the product operates in a manner other than as indicated below, cut off the power supply immediately.
  • Page 32 • Some parts are not designed and manufactured specifically for the Software Kit . Manufactures may discontinue, or change the specification of such general purpose parts. In which case, SEGA cannot repair or replace a failed component whether of not the warranty period has expired.
  • Page 33 6-4 TURNING POWER ON - SOFTWARE INSTALLATION HANDLING THE DISC • To clean a disc, wipe it with a soft cloth, from the centre outwards. - Fig 0 • When handling a disc, using both hands, put your thumbs and forefingers on the oposite sides of the disc. - Fig 0 •...
  • Page 34 6-4 TURNING POWER ON - SOFTWARE INSTALLATION • The software is not installed on the game board (LINDBERGH RED) when the power supply is engaged, so the “Error ” message is not a malfunction. However, if there is another error display, or if there is no video output at all, there might have been an error in product assembly, wiring connections might be faulty, or the LINDBERGH RED might not be functioning properly.
  • Page 35 6-4 TURNING POWER ON - SOFTWARE INSTALLATION • Remove  urea (Resin Head) Screw, and then remove the DVD Case. - Fig 0 • Press the DVD Drive switch and the DVD Drive tray will open. Set the DVD ROM from the DVD Software Kit into the Tray. Always have the DVD label facing upwards. - Fig 0 •...
  • Page 36 6-4 TURNING POWER ON - SOFTWARE INSTALLATION • After the software installation, the Game Image will appear automatically. GAME IMAGE - Fig 0 • Press the DVD Drive switch to open the tray, and remove the DVD ROM. • Press the DVD Drive switch again to close the tray, When the power is off, the tray can not be moved.

  • Page 37: Checking Assembly

    6-5 CHECKING ASSEMBLY - SET UP The Installation ‘TEST MODE’ ensures that the assembly has been made correctly and the IC BD is satisfactory (refer to Chapter 9). Refer to the LINDBERGH Service manual for details on “SYSTEM TEST MODE” and “Chapter 9-3. GAME TEST MODE” for details on the |Game Test. • DISPLAY TEST When the ‘MONITOR TEST’ is selected from the ‘System Test Menu Screen’ a screen to test the CRT Monitor will be displayed. Though the DISPLAY is pre-adjusted at the time of shipment from the factory, view the test screen to determine whether or not adjustment is nessessary.
  • Page 38 6-6 CHECKING ASSEMBLY - SET UP • OUTPUT TEST When the ‘OUTPUT TEST’ is selected from the Sytem Test Menu Screen’ a screen to test the Games Lamps will be displayed. Use the SERVICE button to step to the output required to be checked and then press the Test Button. If the output selected lights the lamp and wiring the Lamp and wiring are opera-...
  • Page 39 6-6 CHECKING ASSEMBLY - SET UP SETTINGS AT TIME OF INSTALLATION During the initial Set Up Proceedure, use the GAME TEST MODE to set the Seat Numbers’ for the Cabinet and perform the settings for In-House Match-Ups. Refer to the “LINDBURGH Service Manual” for details on the “SYSTEM TEST MODE” and “Chapter 9-3 GAME TEST” for the “GAME TEST MODE.” Using “TEST MODE” Set, Adjust and Confirm the following settings shown below. • COIN ASSIGNMENTS Set up the Coin Settings under - COIN ASSIGNMENTS COIN CHUTE TYPE COMMON SERVICE TYPE COMMON • NETWORK SETTING Select the MAIN NETWORK and set it up in the folowinf manner: DHCP DISABLE There is no need to set a specific value for the IP address.

  • Page 40: Precautions When Moving The Machine

    PRECAUTIONS WHEN MOVING THE MACHINE • Always disconnect the power cable before moving the product. If it is moved with the power cable connected, the cable could be damaged, causing fire or electric shock. • Do not push the cabinet from the left/right when attempting to move the unit. Pushing from the sides may cause the unit to tip and result in injury and damage to parts. Do not push on any parts made of glass (e. g. CRT screen) or plastic, as these parts may break and result in bodily injury. Do not push the cabinet from the left/right direction. Do not push on the slanted portion. 7 FIG. 01...
  • Page 41 In locations with low ceilings, remove the POP and POP Holder before moving the machine. Remove the Support Brackets from both sides. 7 FIG. 02 Ground the casters.

  • Page 42: Game Description

    8 GAME DESCRIPTION The following explanations apply when the product is functioning satisfactory. Should the be any actions different from the following contents, some sort of fault may have occured. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation. 8-1 GAME OVERVIEW This ‘CAR Racing’ game has two modes of operation : Players can select either a ‘M�LTIPLAYER’ or ‘SINGLE PLAYER’ Game, plus their choice of CAR, DRIVER and CO�RSE, A wide variety of real time action, based on players actions make the race more exciting. Pushing the ‘BOOST’...
  • Page 43 8-1 GAME OVERVIEW There are initially four COURSES available to select from with a fifth coarse being auto- matically added on a ‘Time Release’ . All coarses are based on laps, and can be set to either 3 or 4. Choice of COURSE (RACE TRACK) COURSE LAPS TIME OF DAY JAKE’ S WORK Counter Clockwise SLIP CIRCUIT Counter Clockwise Night SUNSHINE COAST Counter Clockwise RUMBLING VOLCANO Clockwise Evening RTV ARENA * Counter Clockwise Evening * Time Release (See 8-) RACE SCREEN...

  • Page 44: Game Flow

    8-2 GAME FLOW ADVERTISEMENT DISPLAY Insert Coins until you have enough credits to play the game at which point the ‘Credit’ button on the machine will light. Pressing the Credit button will then transfer credit to your screen and the game will start automatically.
  • Page 45 8-2 GAME FLOW Select DRIVER Screen Select your DRIVER by turning the steering wheel left or right. The colour of the Car wil automatically change depending on the driver selected. Each driver has his or her own ending movie. Press either the ‘Pedal’ or ‘Start’ button to continue.
  • Page 46 8-2 GAME FLOW CUSTOM CAR Screen In the ‘SINGLE PLAYER’ game mode you will be isued a PASSWORD the first time you complete all  Stages. 8-2 Fig 07 NOTE : Passwords are not issued during ‘Multi Player’ games. NAME ENTRY Screen In the ‘SINGLE PLAYER’ game mode you will be able to enter your name (up to three characters) if you make it into the top ranks within the total time required to complete...

  • Page 47: Mode Overview

    8-3 GAME MODE OVERVIEW 8-3-1. MULTIPLAYER GAME Game Content and Rules In this mode, players on the machine in the same facility can compete against each other. Up to four machines can be used for COMMUNICATION PLAY, giving a total number of eight players, if all players wish to play the Multiplayer Game. The game lasts for one race, regardless of ranking, and no paswords are issued.

  • Page 48: Passwords

    8-4 PASSWORDS 8-4 PASSWORD CONDITONS In SINGLE GAME mode, if any of the following conditions are met, the player will be issued with a PASSWORD after the game is finished. The player completes the game without any dressing up, regardless of whether a stage was cleared of not.

  • Page 49: Time Release

    8-5 TIME RELEASE When the power is turned ON after the Date designated in the machines built in Calendar, the following will be added to the available options : Mercury -  Convertable DRIVER Jake Paterson COURSE RTV - ARENA Passwords for the newly available Car and Driver will become active, and the Ranking for the newly added Course will be displayed in the Advertisement loop.

  • Page 50: Test Mode

    TEST MODE Perform periodic tests and data checks using the TEST and SERVICE buttons inside the cabinet. Follow the instructions in this chapter to conduct checks when the game machine is first installed, when money is being collected, or when the game machine does not operate properly. Shown below are the tests and screens to be used for different problems.

  • Page 51: Switch Unit And Coin Meter

    9-1 SWITCH UNIT AND COIN METER Never touch places other than those specified. Touching places not specified can cause electric shock and short circuit accidents. Be careful that a finger or hand does not get caught when opening/closing the coin chute door. • When you enter the Test Mode, fractional coin and bonus adder data is erased. • Adjust the sound to the optimum volume, taking into consideration the environmental requirements of the installation location. • Removing the Coin Meter circuitry renders the game inoperable. SWITCH UNIT Open the coin chute door, and the switch unit shown will appear. The functioning of each SW is as follows: SERVICE BUTTON DEMAGNETIZER BUTTON TEST BUTTON SOUND VOLUME SWITCH...
  • Page 52 COIN METER Open the Cashbox Door by using the key to have the Coin Meter appear underneath the Cashbox. COIN METER 9-1 FIG. 02 COIN METER...

  • Page 53: System Test Mode

    9-2 SYSTEM TEST MODE • Refer to BOOKKEEPING in GAME TEST MODE for this product’ s data. • Adjust for an appropriate sound volume in consideration of the installation site. • If the coin meter circuit is removed, play cannot be executed. • Read the LINDBERGH service manual included with the product for details about System Test Mode. However, the settings for this product should follow the specifications in this manual. In the SYSTEM TEST MODE, LINDBERGH board functioning can be checked, the monitor adjusted, and the coin setting performed. Refer to LINDBERGH service manual for the details. Note that the settings of the following items need to be performed in accordance with the instruction given.

  • Page 54: Game Test Mode

    9-3 GAME TEST MODE • When changing the game configuration, changes will not take effect until the Game Test Mode properly after configuration changes. Be sure to exit the Game Test Mode properly after configuration changes. • Do not configure the game in ways not described in this text. It is possible that the game will not function properly. 9-3-1 GAME TEST MODE Menu Select GAME TEST MODE from the System Menu screen to display the Game Test Menu screen. GAME TEST MODE INP�T TEST O�TP�T TEST FORCE FEEDBAC� INP�T ASSIGNMENTS GAME ASSIGNMENTS BOO��EEPING...

  • Page 55: Input Test

    9-3-2 INPUT TEST Select INPUT TEST to display the following screen and check the status of input devices. This test should be used periodically to check that each input device is functioning correctly. INP�T TEST STEERING BRA�E GEAR POSITION START VIEW CHANGE BOOST SERVICE...

  • Page 56: Output Test

    9-3-3 OUTPUT TEST Select OUTPUT TEST to display the following screen and check the status of each lamp. This test should be used periodically to check that the lamps are functioning correctly. O�TP�T TEST START B�TTON VIEW CHANGE B�TTON BOOST B�TTON RED LAMP �...

  • Page 57: Force Feedback

    9-3-4 FORCE FEEDBACK When you select “FORCE FEEDBACK” , a connection test runs and the STEERING rotates. Make sure that no one is touching the STEERING before running these tests as contact may cause injury. After the check is completed, the following FORCE FEEDBACK screen will appear, and you will be able to set the level of STEERING resistance. FORCE FEEDBAC� (MIN 0 : MAX �0 : DEFA�LT 4) FORCE= XX �P DOWN...

  • Page 58: Input Assignments

    9-3-5 INPUT ASSIGNMENTS Select INPUT ASSIGNMENTS to display the following screen. INP�T ASSIGNMENTS STEERING : XX GAS ADJ�STMENTS BRA�E ADJ�STMENTS -> EXIT SELECT WITH SERVICE B�TTON AND PRESS TEST B�TTON 9-3-5 FIG. 01 ● STEERING: Adjust the centering of the STEERING control. ●...
  • Page 59 STEERING Make adjustments to STEERING. Press the TEST Button to display the following screen. STEER ADJ�STMENTS (MIN -40 : MAX 40 : DEFA�LT 0) STEERING = XXX CENTER RIGHT LEFT -> EXIT SELECT WITH SERVICE B�TTON AND PRESS TEST B�TTON 9-3-5 FIG.
  • Page 60 GAS ADJUSTMENTS Make adjustments to GAS. Press the TEST Button to display the following screen. GAS ADJ�STMENTS FIRST, STEP ON THE GAS F�LLY, AND RELEASE IT -> RESET EXIT SELECT WITH SERVICE B�TTON AND PRESS TEST B�TTON 9-3-5 FIG. 03 Set the MAX position by stepping on the GAS pedal.
  • Page 61 BRAKE ADJUSTMENTS Make adjustments to BRAKE. Press the TEST Button to display the following screen. BRA�E ADJ�STMENTS FIRST, STEP ON THE BRA�E F�LLY, AND RELEASE IT -> RESET EXIT SELECT WITH SERVICE B�TTON AND PRESS TEST B�TTON 9-3-5 FIG. 04 Set the MAX position by stepping on the BRAKE pedal.

  • Page 62: Game Assignments

    9-3-6 GAME ASSIGNMENTS Select GAME ASSIGNMENTS to display the following screen. GAME ASSIGNMETNS CABINET ID GAME DIFFIC�LTY NORMAL CONTIN�E ADVERTISE SO�ND COMMENTARY VOL�ME HIGH N�M OF LAPS HEAT � DRESS CODE SPEEDOMETER �M/H CAS�AL �SER MODE DEFA�LT SETTING -> EXIT 9-3-6 FIG.
  • Page 63 ● DRESS CODE: Switches the level of female appearances in the game. LOW: All screens and movies will be displayed. HIGH: The advertise movie will be cut. Driver selection will be cut. (Player will not be able to select car and driver.) The ending movie will be cut.

  • Page 64: Bookkeeping

    9-3-7 BOOKKEEPING Select BOOKKEEPING to display the following screens of operating status data. BOO��EEPING �/2 COIN � COIN 2 TOTAL COINS COIN CREDITS SERVICE CREDITS TOTAL CREDITS N�MBER OF GAMES SINGLE PLAY M�LTI PLAY TOTAL TIME 00D 00H 00M 00S PLAY TIME 00D 00H 00M 00S AVERAGE PLAY TIME...
  • Page 65 BOO��EEPING 2/2 TIME HISTOGRAM TOTAL RATIO 00M00S - 00M59S 00M00S - 00M59S 0M00S - 00M59S 00S - 00M59S 0S - 00M59S 00M59S 0M59S 0� 0� 0� 0� 0� 0� 0� 0�M00S - 0�M59S 0�M00S - 0�M59S �M00S - 0�M59S 00S - 0�M59S 0S - 0�M59S 0�M59S �M59S...

  • Page 66: Backup Data Clear

    9-3-8 BACKUP DATA CLEAR Select BACKUP DATA CLEAR to display the following screen. BAC��P DATA CLEAR -> YES(CLEAR) NO(CANCEL) SELECT WITH SERVICE B�TTON AND PRESS TEST B�TTON 9-3-8 FIG. 01 This screen allows you to clear backup data. Use the cursor to select YES or NO. ●...

  • Page 67: Control Panel (Handle Mecha)

    CONTROL PANEL ● In order to prevent an electric shock and short circuit, be sure to turn power off before performing work by touching the interior parts of the product. ● Be careful not to damage the wires. Damaged wires may cause electric shock or short circuit. ● Do not touch undesignated places. Touching places not designated can cause electric shock or short circuit. ● This work should be performed by the Location's Maintenance Man or Service- man. Performing work by non-technical personnel can cause electric shock hazard. ● Do not perform work other than those specified in this Manual in order to pre- vent accidents during performing work and operation after performing work. If performing work other than those stated in this manual is required for repair, contact the offices herein stated in this manual. ● Be very careful when soldering. Handling a soldering iron carelessly may result in a fire or a burn. ● Be extremely careful when heating the heat-shrinkable tube. Failure to do so may result in a fire or burns. ● The motor parts will be very hot after shutting down the game. After shutdown, wait a few moments for the motor parts to cool before you begin working on the unit. ● This unit is a heavy item weighing approximatly 20Kg (44.1lbs) Therefore be very careful when performing the work. Use plural workers ● Exercise extreme caution when handling the internal parts of the Control Panel. Watch out for damage, warping and loss. The loss of just one piece may result in damage to or lead to faulty operation of the entire unit. ● Be careful that your fingers do not get caught when opening and closing the control panel, adjusting the VR bracket, or performing other maintenance tasks. ● When securing the plastic-made parts, do not excessively fasten screws and nuts. Failure to observe this may damage the parts and cause injury due to fragments resulting from damage.

  • Page 68: Opening The Control Panel

    10-1 OPENING THE CONTROL PANEL If the steering wheel is not functioning correctly, or if adjusting the volume has no effect in test mode, the volume may not be engaged correctly or it may be defective. Follow the steps below to adjust the gear engagement or replace the volume.

  • Page 69: Adjusting/Replacing The Volume

    10-2 ADJUSTING/REPLACING THE VOLUME Adjustment Procedure Loosen the two screws that secure the VR bracket, and adjust the gear and the angle of engagement by moving the VR bracket. Center the steering wheel, and engage the gear while making sure that the D-cut flat edge of the volume axis is aligned in the direction indicated (see 10-2 FIG.
  • Page 70 10-2 ADJUSTING/REPLACING THE VOLUME Replacement Procedure When replacing the volume, you will also need to prepare three lengths of heat-shrinkable tubing (Part No.: 310-5029-F20), as well as use the wires that are already soldered onto the volume. For this task, you will need a Phillips-head screwdriver (for M4 screws), a 2 mm hexagon wrench, an 11 to 12 mm adjustable wrench, wire cutter, knife, wire stripper, soldering iron, and work dryer.

  • Page 71: Greasing

    10-3 GREASING ● Use only the specified grease. Using any other kind of grease can result in dam- age to parts. ● Do not apply grease to locations other than as specified. Doing so may create a risk of operational problems and deterioration of parts. ● The period for greasing specified herein is a standard. Apply greasing to the specified portions as occasion arises. Once every three months, apply grease to the parts indicated. Use Grease Mate-brand spray grease (Part No.: 090-0066).

  • Page 72: Shift Lever

    SHIFT LEVER ● When working with the product, be sure to turn the power off. Working with the power on may cause an electric shock or short circuit. ● Be careful not to damage the wires. Damaged wires may cause an electric shock, short circuit or present a risk of fire. If the shift lever switch input does not function correctly on the INPUT TEST screen, the switch may need to be replaced. To carry out this maintenance, you must first remove the shift lever unit. For this task, you will need a tamperproof wrench (for M5 screws), /and a Phillips-head screw- driver (for M4 screws).

  • Page 73: Switch Replacement

    11-2 SWITCH REPLACEMENT Follow the instructions below to change the microswitch. Unscrew and remove the M3x16 Self Tapping Screws which secure the microswitch to the Gear Shift base. Remove the microswitch. Remove the wiring harness from the old miscoswitch and re-attach it to the replacement switch in te same manner Using the M3x10 self tapping screws, refit the replacement microswitch to the Gear Shift base.

  • Page 74: Accelerator & Brake

    ACCELERATOR & BRAKE ● When working with the product, be sure to turn the power off. Working with the power on may cause an electric shock or short circuit. However, the unit must be switched on when using test mode. Do not touch any part of the unit except those areas indicated. ● Be careful not to damage the wires. Damaged wires may cause an electric shock, short circuit or present a risk of fire. ● This work should be performed by site maintenance personnel or other skilled professionals. Work performed by non-technical personnel can cause a severe accident such as an electric shock. ● To prevent accidents while working or while operating the product after it has been installed, be sure not to conduct any procedures other than those given in this manual. There are cases in which procedures not covered in this manual require special tools and skills. If a procedure not given in this manual is re- quired, request service from the office given in this manual or from the point of purchase. Do not touch the steering wheel when switching the unit on. The steering wheel undergoes automatic initialization immediately after the unit is switched on. Be sure to perform volume's move value setting in the Input Test in the Game Test Mode after replacing or adjusting the Volume. If the accelerator or brake pedals are not functioning correctly, you may need to adjust the posi- tioning of the volume or replace it with a new one. In addition, you should apply grease to the gear contacts and spring parts once every three months.

  • Page 75: Volume Adjustment And Replacement

    12-1 ADJUSTING/REPLACING THE VOLUME When the accelerator pedal is not being pressed, the accelerator volume should have a value of 30H or less. When the pedal is being pressed, the value should be C0H or greater. When the brake pedal is not being pressed, the value should be 35H or less. When the pedal is being pressed, it should be D0H or more.
  • Page 76 Replacing the Volume Switch off the unit. Remove the two screws and lift off the potentio cover. TRUSS SCREW (2), chrome M4x8 POTENTIO COVER POTENTIOBASE 12-1 FIG. 03 Detach the connector from the volume to be replaced. Remove the single screw that secures the potentiobase (see 12-1 FIG. 02). Without detaching the volume, remove the potentiobase (see 12-1 FIG.

  • Page 77: Greasing

    12-2 GREASING Use only the specified grease. Using any other kind of grease can result in dam- age to parts. Once every three months, you should apply grease to the gear contacts and spring parts. Use Grease Mate-brand spray grease (Part No.: 090-0066). POTENTIOBASE 12-2 FIG. 01...

  • Page 78: Coin Handling And Credit Setting

    COIN HANDLING Handling the Coin Jam If the coin is not rejected when the REJECT button is pressed, open the coin chute door and open the selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions. Cleaning the Coin Selector ● Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry.
  • Page 79 Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry. Remove the CRADLE. When removing the retaining ring (E ring), be very careful so as not to bend the rotary shaft. CRADLE FIG.
  • Page 80 Adjusting the Price of Play This product comes equiped with a Money Controls SR3 Coin Acceptor. To adjust the price of play ALL credit setting are adjusted via the EXCEL CREDIT BOARD. IMPORTANT! The CREDIT SETTINGS within the SYSTEM TEST MODE must be set to 1 coin 1 credit to allow the CREDIT BOARD to function correctly.
  • Page 81 REGIONAL AND ACCEPTOR SETTINGS (SW3)
  • Page 82 STERLING PRICE OF PLAY SETINGS (SW1)
  • Page 83 EURO PRICE OF PLAY SETTINGS (SW1)
  • Page 84 SELECTING STERLING / EURO OPTION The SR3 coin acceptor (suppied) is programmed to accept UK Stering and the Euro. Factory setting is for the UK Sterling. If the configuration needs to change to the Euro, then please follow the instructions below for chaging over o the Euro and visa versa. BANK SELECT This function allows you to enable both or individual select banks of coins via switches 7 and 8 on the 8 way DIL switch. This enables the selection of 2 different currencies, one in each bank, or 12 coins/tokens in both banks from the same country. To enable/disable the banks set the switches as show below. Both Banks ON (enabled) - Sterling and Euro’s Bank 1 ON (enabled) and Bank 2 OFF (disabled) - Sterling ONLY Bank 1 OFF (disabled) and Bank 2 ON (enabled) - Euro’s ONLY Please remove power from the SR3 before changing the status on the DIP SW.
  • Page 85 TEACH AND RUN PROGRAMMING (SR3) If the machine is positioned in location where only tokens are used, then the SR3 Coin Acceptor can be programmed to accept and credit special coins/tokens. Pllease follow the instructions below to enable and program the TEACH & RUN facility. Table 1: Teach & Run Programming Bank 1. Coin Number Bank 2 Table 2: Teach & Run Programming Bank 2 Coin Number Teach and Run EXAMPLE. (To teach coin channel 12 for £1) Switch off the power to the SR3 and set the Program DIL switches to:- TOTAL Switch on the power to the SR3.

  • Page 86: Monitor

    Indicates that access to a specific part of the equipment is forbidden. Indicates the instruction to disconnect a power connector or to unplug. • When performing such work as installing and removing the monitor, inserting and disconnecting the external connectors to and from monitor interior and the monitor, be sure to disconnect the power connector (plug) before starting the work. Proceeding the work without following this instruction can cause electric shock or malfunctioning. • Using the monitor by converting it without obtaining a prior permission is not allowed. SEGA shall not be liable for any malfunctioning and accident caused by said conversion. • Primary side and Secondary side The monitor's circuit which is divided into the Primary side and Secondary side, is electrically isolated. Do not touch the primary side, or do not touch both the primary side and the secondary side simultaneously. Failing to observe the instruction can cause electric shock and this is very dangerous. When making monitor adjustments, use a nonconductive driver and make adjustment without touching any part other than the Adjustment V. R. and knob. Also, be sure not to cause a short-circuit to the...
  • Page 87 • High-tension Voltage Some of the parts inside monitor are subject to high-tension voltage in excess of 20,000 volts and very dangerous. Therefore, do not touch the monitor interior. Should soldering & paper wastes, etc. be mixed in the monitor interior, turn the power off so as not to cause malfunctioning or fire hazard.
  • Page 88 For the purpose of static prevention, special coating is applied to the CRT face of this product. To protect the coating, pay attention to the following points. Damaging the coating film can cause electric shock to the customers. • Do not apply or rub with a hard item (a rod with pointed edge, pen, etc.) to or on the CRT surfaces.

  • Page 89: Cleaning The Crt Surfaces

    14-2 CLEANING THE CRT SURFACES Static preventive coating is applied to the CRT surfaces. When cleaning, pay attention to the following points. Peeling off of static preventive coat can cause electric shock. • Remove smears by using a dry, soft cloth (flannels, etc.). Do not use a coarse gauze, etc. •...

  • Page 90: Adjustment Procedure

    14-3 ADJUSTMENT PROCEDURE • Monitor adjustments have been made at the time of shipment. Therefore, do not make further adjustment without a justifiable reason. Adjusting the monitor which contains high tension parts is dangerous work. Also, an erroneous adjustment can cause deviated synchronization and image fault, resulting in malfunctioning.
  • Page 91 This product’s monitor is 200-6095. For adjustment method, carefully read and carry out the following. With this product, the hue of each color cannot be adjusted. A: FUNC (SA04) B: UP (SA03) C: DOWN (SA01) D: DEGAUSS (SA05) 14-3 FIG. 02 There are four buttons to operate the adjustment.
  • Page 92 Pressing the UP/DOWN button again causes the adjusting works to be done. When there is no input of the UP/DOWN button for 6 seconds or the FUNC button is pressed, the adjustment value is memorized. - If EXIT is selected (red display) and the UP/DOWN button is pressed, the adjustment mode will be canceled and the menu display will disappear.

  • Page 93: Fluorescent Light/Other Lamps Replacement

    FLUORESCENT LIGHT/OTHER LAMPS REPLACEMENT • When working with the product, be sure to turn the power off. Working with the power on may cause an electric shock or short circuit. • You may get burned by a hot fluorescent lamp or other lamps. Pay full attention to the lamps when performing the work. • Be sure to use lamps of the designated rating. Using lamps of undesignated rating can cause a fire or malfunctioning. • There is the danger of short circuits or smoke generation due to deterioration of insulation in lighting fixtures resulting from age deterioration. Check for anomalies such as the following: Does it smell like something is burning? Is there socket discoloration? Are any lamps being replaced frequently? Do lamps not go on properly? • Be careful when handling the plastic parts. Failure to observe this may cause injury or damage due to fragments, etc. • Do not attempt to replace billboard fluorescent lamps while standing on the base. If you should misstep while working, you could stumble or fall down. Remove the rear cover from the ASSY BILLBOARD by unscrewing the 3x Philips fixings. 15 FIG. 01...
  • Page 94 The Fluorescent Lamp is positioned on the rear wall of the BILLBOARD BOX. To remove carefully push the lamp towards the rear of the cabinet (Seat side). This will then allow the lamp to be accessed through the REAR access panel. Fluorescent Lamp 15 FIG.
  • Page 95 Remove the Switch Plate. The Switch Plate Disconnect the connector. contains wiring connections. Disconnect the connector, taking care not to damage the wiring. SWITCH PLATE 15 FIG. 06 There is a metal fitting at the base of the buttons on the Button Plate. Rotate this metal fitting to unlock it, then remove the printed circuit board from the Button Plate.

  • Page 96: Periodic Inspection

    PERIODIC INSPECTION The items listed below require periodic check and maintenance to retain the performance of this machine and to ensure safe business operation. When handling the controller, the player will be in direct contact with it. In order to always allow the player to enjoy the game, be sure to clean it regularly.
  • Page 97 Move the Seat to the rearmost position and apply spray greasing to the portion shown at the right once every 3 months by using NOK KLUBER L60 or GREASE MATE SEGA PART No. 090-0066. After greasing, move the Seat a few times forward and backward so as to allow the grease to be applied all over uniformly.

  • Page 98: Troubleshooting

    TROUBLESHOOTING 17-1 TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN) • In order to prevent electric shock and short circuit, be sure to turn power off before performing work. • Be careful so as not to damage wirings. Damaged wiring can cause electric shock or short circuit.
  • Page 99 Sounds are emitted and Faulty connections for the visual Check the connections for the monitor the lamps are lit, but the signal connector or the monitor power and game board connectors. screen is black. connector. Broken monitor. Contact the company from whom the unit was purchased.
  • Page 100 The accelerator or Incorrect volume setting. Adjust the volume value in the Test brake does not perform Mode. <See Chapter 9.> appropriately. Faulty Volume attachment or adjust Adjust the volume attachment and verify gear alignment. in Test Mode. <See Chapter 9, 12.> Faulty connector connection.
  • Page 101 Replacing Fuses • In case fuse replacements other than those stated in this manual are necessary, contact where you purchased the product from for inquiries regarding this matter. • In order to prevent an electric shock, be sure to turn power off and unplug from the socket outlet before performing work by touching the internal parts of the product.

  • Page 102: Error Messages

    17-2 ERROR MESSAGES This product displays the following messages when it detects an error. Read the error description and follow the steps indicated. Refer to the LINDBERGH Service Manual for details on error messages displayed with the LINDBERGH logo. Error 11 JVS I/O board is not connected to main board.
  • Page 103 Error 1003 Same CabinetID Found. The connected cabinets have the same CABINET ID. In GAME TEST mode, set the CABINET IDs making sure that they are all different. Error 1004 Network has not been initialized. The network has not been initialized. Check to make sure the network device on the LINDBERGH is functioning properly.

  • Page 104: Game Board

    GAME BOARD ● When working with the product, be sure to turn the power off. Working with the power on may cause an electric shock or short circuit. ● Be careful not to damage the wires. Damaged wires may cause an electric shock, short circuit or present a risk of fire. ● Do not use this product with connectors other than those that were connected and used with the game board at the time of shipping. Do not carelessly con- nect wires to connectors that were not used at the time of shipping, as this may cause overheating, smoke or fire damage. In this product, setting changes are made during the test mode. The game board need not be operated. Use the game board, etc. as is with the same set- ting made at the time of shipment so as not to cause electric shock and mal- functioning. Static electricity from your body may damage some electronics devices on the IC board. Before handling the IC board, touch a grounded metallic surface so that the static electricity can be discharged.

  • Page 105: Removing The Lindbergh

    18-1 REMOVING THE GAME BOARD ● When returning the game board after making repairs or replacements, make sure that there are no errors in the connection of connectors. Erroneous con- nections can lead to electrical shock, short circuits or fires. ● When connecting a connector, check the direction carefully. Connectors must be connected in only one direction. If indiscriminate loads are applied in mak- ing connections, the connector or its terminal fixtures could be damaged, re- sulting in electrical shock, short circuits or fires. Switch off the main unit. Remove one truss screw from both right and left sides of base lid. Unlock the base using the Master Key. Turn the Lock Handle on the base lid Right to unlock the lid. Place a drop cloth on the floor behind the the seated area of the machine to prevent damage to the back of the seat when open, carefully lift the lid and slowly lower the back of the seat until it touches the floor.
  • Page 106 18-1 REMOVING THE GAME BOARD Remove all connecters fitted to the LINBERGH Game Board. Care should be taken, 'Do Not' pull on the wiring in order to disconnet the plug or sockets as this could damage their terminations.Some of the connectors may be secured by screws..

  • Page 107: Composition Of The Game Board

    18-2 COMPOSITION OF GAME BOARD ● With the key chip inserted into it, this board serves as a special-purpose game board for the product. ● Use with the dip switches (DIP SW) on the board at the prescribed settings. If settings do not match the product, an error message will be displayed. In some cases, the game cannot be started.

  • Page 108: Communication Play

    COMMUNICATION PLAY For this game, up to 4 machines can be connected to allow up to 4 players to play simultaneously. In this instance, connecting the communication cable and setting for the communication play are required. 19-1 INSTALLATION PRECAUTIONS • Before starting to work, ensure that the Power SW is OFF. Failure to observe this can cause electric shock or short circuit.
  • Page 109 Distance between Machines The maximum distance between the game machines depends on the length of the cables connecting them, but make sure the units are separated from each other by at least 70 cm (27.6 in) so that players can pass between them. Do not install more than the designated number shown in the layout diagram.

  • Page 110: Connecting The Communication Cable

    19-2 CONNECTING THE COMMUNICATION CABLE To enable network play, the hubs inside each of the game machines involved must be connected with network (LAN) cables. Connect the hub inside one of the machines to the hubs in each of the other machines using LAN cables. There is no need to connect the other machines to each other.
  • Page 111 Remove the 6 screws from the lower back lid and then remove the lid. SCREW (6), black M4x8, w/flat & spring washers 19-2 FIG. 04 LOWER BACK LID 19-2 FIG. 05 Pass the LAN cable through the edge holder (the rectangular frame-shaped plastic part.) Pressing down on the edge holder from above will cause it to stretch elastically and open up.
  • Page 112 Insert the communication cable connector into one of the open ports. Port 1 on the hub is connected to the game board inside the base. 19-2 FIG. 07 Attach the lower back lid with the 6 screws. Once the machines have been linked for network play, line them up. Leave as much space as possible between the machines.

  • Page 113: Network Play Settings

    19-3 NETWORK PLAY SETTINGS Each of the linked machines must be set up for network play. If the machines are not set up correctly, network play will not be possible. For this game, up to 4 machines can be connected to allow up to 4 players to play simultaneously. Turn on the power on each machine to be used in network play.

  • Page 114: Network Play Precautions

    19-4 NETWORK PLAY PRECAUTIONS • In network play, difficulty level and other settings are made from CABINET ID Number �. Changing the settings at CABINET ID Number � also changes the settings for other units. • If one of the units attached for network play enters Test Mode, the other unit will display the Error screen.

  • Page 115: Attaching Satellite Number Stickers

    19-5 ATTACHING SATELLITE NUMBER STICKERS Attach the satellite number stickers to the back of each seat of the cabinets. SATELLITE NUMBER STICKER 19-5 FIG. 01...

  • Page 116: Design-Related Parts

    DESIGN-RELATED PARTS For the warning display stickers, refer to Section 1 . PLEASE NOTE: The illustration above shows that of a different model built in Europe. When ordering spares, please place the letters "UK" after the part number.

  • Page 117: Parts List

    PARTS LIST 1 TOP ASSY RTV 2 RTV-0100 3 RTV-6001 ASSY TUBE ASSY FLEX TUBE 5 RTV-0320 4 RTV-0300 12 RTV-1520 13 RTV-1530 SW UNIT ASSY COINCHUTE TOWER ASSY BASE BOX ASSY MAIN BASE 7 RTV-0550 6 RTV-0500 15 RTV-1540 14 FRI-1510X ASSY BILLBOARD ASSY CCFL L...
  • Page 118 PARTS LIST...
  • Page 119 � TOP ASSY RTV (D-�/2)
  • Page 120 1 TOP ASSY RTV (D-2/2) ITEM NO. PART NO. DESCRIPTION NOTE � RTV-�000��� ASSY COC�PIT �P RTV-INST-TW ASSY INSTALLTION �IT NOT SHOWN RTV-0400�� ASSY AC B�T MAIN REAR OF CABI RTV-0�00�� ASSY AC B�T S�B REAR OF CABI � 42�-�020�� STIC�ER CA�TION FOR� LB��02 STIC�ER DANGERO�S VOLTAGE �0...
  • Page 121 2 ASSY COCKPIT (RTV-10001UK) (D-1/3)
  • Page 122 2 ASSY COCKPIT 1P (RTV-10001UK) (D-2/3) ITEM NO. PART NO. DESCRIPTION NOTE � ORT-��20�� ASSY S�B MAIN BASE RTV-�550�� ASSY MONITOR COVER L 2P RTV-�560�� ASSY MONITOR COVER R 2P RTV-2000�� ASSY CONTROL PANEL POD-�023�� MONITOR STAND RTV-��00�� ASSY PEDAL BASE � POD-�02��� MONITOR S�PPORT �...
  • Page 123 2 ASSY COCKPIT 1P (RTV-10001UK) (D-3/3 ITEM NO. PART NO. DESCRIPTION NOTE 2�� 050-F00600 M6 N�T FLG SER PAS 2�9 000-P00320 M3X20 MSCR PAN PAS 0�2-HB05�2 N�0X�2" S/TAP HEX B PAS 22� 060-F00500 M5 WSHR FORM A FLT PAS 30� RTV-600���� WH AC MONITOR RTV-600����...
  • Page 124 3 ASSY SUB MAIN BASE (ORT-1120UK) (D-1/1) ITEM NO. PART NO. DESCRIPTION NOTE � D�T-��2��� MAIN BASE MA�00� CASTOR SWIVEL 63MM NYLON �0 60�-5699��-0� LEG ADJ M�6X�00 �L/N�T 030-000��6 M�X�6 BLT PAS 2�0 060-S00�00 M� WSHR SPR PAS...
  • Page 125 4 ASSY MONITOR COVER L (RTV-1550UK) (D-1/1) ITEM NO. PART NO. DESCRIPTION NOTE � ABX-�960�� ASSY SPEA�ER L RTV-�55�-A COVER PANEL BLAN� L DYN-�032�� MAS� B�T 20� 000-P0040�-W M4X�MSCR PAN W/FS PAS...
  • Page 126 5 ASSY MONITOR COVER R (RTV-1560UK) (D-1/1) ITEM NO. PART NO. DESCRIPTION NOTE � ABX-�965�� ASSY SPEA�ER R RTV-�56�-A COVER PANEL BLAN� R DYN-�032�� MAS� B�T 20� 000-P0040�-W M4X�MSCR PAN W/FS PAS...
  • Page 127 6 ASSY CONTROL PANEL & HANDLE MECHA (RTV-2000UK) (D-1/2) ITEM NO. PART NO. DESCRIPTION NOTE � SPG-200�X STEERING WHEEL DYN-�209X HANDLE COLLAR SPG-2002 STEERING EMBLEM RTV-2004 CONTROL PANEL COVER RTV-200��� CONTROL PANEL B�T TWIN RTV-2003 SHIFT COVER INY (�PPER) � DYN-�223X SHIFT COVER B RTV-2002�� SHIFT BASE �0 RTV-2500 ASSY HANDLE MECHA...
  • Page 128 6 ASSY CONTROL PANEL (RTV-2000UK) (D-2/2)
  • Page 129 7 ASSY HANDLE MECHA (RTV-2500) (D-1/2)
  • Page 130 7 ASSY HANDLE MECHA (RTV-2500) (D-2/2) ITEM NO. PART NO. DESCRIPTION NOTE � ORA-250� HANDLE BASE SPG-2502 BASE LID ORA-2502 HANDLE SHAFT SPG-2504 P�LLEY 20 S5M SPG-2505 P�LLEY 60 S5M ORA-2503 MOTOR BR�T � ORA-2504 VR BR�T � ORA-2505 STOPPER BOLT ORA-2506 STOPPER R�BBER �0 SPG-2453 �EY 4x4x40...
  • Page 131 7 ASSY PEDAL BASE (RTV-1100UK) (D-1/1) ITEM NO. PART NO. DESCRIPTION NOTE � SPG-2200-0� ASSY BRA�E & ACCEL TOF-�50��� PEDAL BASE FZR-�02��� WIRE COVER BOX SPG-2222�� ANTI FINGER TRAP PLATE L SPG-2223�� ANTI FINGER TRAP PLATE R SPG-2224�� PEDAL GAS�ET � SPG-203��� NEOPRENE R�BBER STRIP �0 �0�...
  • Page 132 8 ASSY BILLBOARD (RTV-0500UK) (D1/2)
  • Page 133 8 ASSY BILLBOARD (RTV-0500UK) (D2/2) ITEM NO. PART NO. DESCRIPTION NOTE � 399-�300-BL-�� CCFL �IT 300MM BL�E 399-�300-RE-�� CCFL �IT 300MM RED RTV-050��� BILLBOARD BOX RTV-0502 FRONT DESIGN PLATE RTV-0503�� BAC� DESIGN PLATE � RTV-0505�� BAC� PLATE � 06�-53�2�0-PN M5 WSHR �2OD FLT R�BBER �2 RTV-05����...
  • Page 134 9 ASSY SEAT TWIN (RTV-1600UK) (D1/1) 202 203 207 ITEM NO. PART NO. DESCRIPTION NOTE 253-5550-0R PAN DRIVING SEAT RED STC-�603 SEAT BASE � RTV-�606�� SEAT MO�NT TRAY �2 STC-�6�0 SAFETY G�ARD �4 STC-�6�2 PROTECT R�BBER �5 STC-�6�3 SAFETY G�ARD F 2� RTV-�603�� STIC�ER SEAT BAC�...
  • Page 135 10 ASSY MAIN BD (RTV-4500UK) (D-1/1) 202 102 ITEM NO. PART NO. DESCRIPTION NOTE � RTV-450��� BASE MAIN BD �44-000�D-92-�2 ASSY CASE LBG L �GB ��00 EXP RTV-4502�� ELEC B�T �3�-�45�2 PCB I/O CONTROL FOR JVS LB���� STIC�ER PLEASE RECYCLE LB��0� STIC�ER WARNING BATTERY �...
  • Page 136 11 ASSY ELEC BD (RTV-4600UK) (D1/1) ITEM NO. PART NO. DESCRIPTION NOTE � RTV-460��� WOODEN BASE ELEC �02 560-LBGH-0��� XFMR 220-240V �00V �A �03 �3�-�45�5-A0�9� PCB AMP SND ANALOG IN �04 �3�-�4592-0� PCB SERVO MOTOR DRIVE SER EMI �05 �3�-�455�-02�� PCB AC DISTRIB�TION ���...
  • Page 137 12 ASSY BASE LID R (FRI-1510UK) (D1-1) ITEM NO. PART NO. DESCRIPTION NOTE � D�T-�5���� BASE LID R D�T-�5��-C�� GAS�ET STRIP D�T-�5��-D�� LOC� TONG�E D�T �0� 220-55�5�� LOC� 050-F00400 M4 N�T FLG SER PAS 30� 600-9020-44� WH EARTH 200MM M4/M4 �...
  • Page 138 13 ASSY COIN CHUTE TOWER (RTV-0300UK) (D1-1) INSIDE ITEM NO. PART NO. DESCRIPTION NOTE � RTV-030��� COIN CH�TE TOWER VTS-FRI-T-R PCB VTS FRI TWIN PP�0�� CASH BOX FOR MINI DOOR RTV-0302�� CCT FLOOR RTV D�T-0302�� PLATE COIN PATH �� LB��03 STIC�ER CA�TION �2 TFF-0304�� LOC�ING HASP �3 TFF-0305��...
  • Page 139 14 ASSY WIRE COVER RTV TWIN (D1/1) ITEM NO. PART NO. DESCRIPTION NOTE � DYN-0005�� AC COVER A DYN-0009�� HOLE LID 20� 000-P0030�-WB M3X� MSCR PAN W/FS BL� 050-F00400 M4 N�T FLG SER PAS 2�0-A02000-A RO�TER TWST D20 ADH 30� 600-6����-04 WIRE HARN EXT AC (SPG) RTV-60�0���...
  • Page 140 15 ASSY AC BKT MAIN (D-1/1) Slave M/C Only ITEM NO. PART NO. DESCRIPTION NOTE � RTV-040��� AC B�T �� RTV-0403�� FILTER BR�T �0� EP�3�2 SCHAFNER NOISE FILTER �02 EP�3�� IEC INLET SW F�SED �04 5�4-50��-5000 F�SE 5X20 CERAMIC SB 5000MA �05 3�0-5029-D50� HEAT SHRIN�...
  • Page 141 16 ASSY AC BKT SUB (RTV-0700UK) (D-1/1) Please see item 15 (ASSY AC BKT MAIN) for diagram ITEM NO. PART NO. DESCRIPTION NOTE � RTV-040��� B�T AC �� TFF-0402�� CONN COVER �06 42�-6595-5000-T STIC�ER F�SE 5000MA �0� LB�096 STIC�ER PROTECTIVE EARTH �0� EP�39� CO�PLER INLINE LAN RJ45 �TP ���...
  • Page 142 17 ASSY ACCEL&BRAKE (SPG-2200-01) (D-1/2)
  • Page 143 17 ASSY ACCEL&BRAKE (SPG-2200-01) (D-2/2) ITEM NO. PART NO. DESCRIPTION NOTE � SPG-220� BASE SPG-2202 ACCEL PEDAL SPG-2203 BRA�E PEDAL SPG-2204 ACCEL SPRING SPG-2205 BRA�E SPRING SPG-2206 SHAFT � SPG-220� ACCEL GEAR � SPG-220� BRA�E GEAR SPG-2209 NE�TRAL STOPPER �0 SPG-22�0 VR PLATE ACCEL ��...
  • Page 144 18 ASSY SPEAKER L (ABX-1960UK) ITEM NO. PART NO. DESCRIPTION NOTE � APC-�56��� SPEA�ER BR�T �0� �30-5�56-02 SPEA�ER BOX �OHM 20W VA� YL 20� 000-P005�2-W M SCR PH W/FS M5x�2...
  • Page 145 19 ASSY SPEAKER R (ABX-1965UK) ITEM NO. PART NO. DESCRIPTION NOTE � APC-�56�X SPEA�ER BR�T �0� �30-5�56-02 SPEA�ER BOX �OHM 20W VA� YL 20� 000-P005�2-W M SCR PH W/FS M5x�2...
  • Page 146 20 ASSY SW PLATE (RTV-2100) NOTE: When attaching the STICKER, line it up with the hole. ITEM NO. PART NO. DESCRIPTION NOTE � RTV-2�0� STIC�ER START/VIEW ORT-2�0� B�TTON PLATE ���-64��B PC BD LIGHTING SWX5 �0� 2�2-5205-�2 CONN JST M �2P RTA �02 509-5560-Y-9� PB SW W/L 6V �L Y ROHS �03 509-556�-R-9�...

  • Page 147: Wire Color Code Table

    WIRE COLOR CODE TABLE The DC power wire color for this product is different from previous SEGA titles. Working from the previous wire colors will create a high risk of fire. The color codes for the wires used in the diagrams in the following chapter are as follows. PINK SKY BLUE BROWN PURPLE LIGHT GREEN Wires other than those of any of the above  single colors will be displayed by  alphanumeric characters.

  • Page 148: Wiring Diagram

    23 3 WIRING DIAGRAM (D-1/3)
  • Page 149 (D-2/3)
  • Page 150 (D-3/3)

Table of Contents