Network Setting (Core) - Sega VIRTUA COP Owner's Manual

NETWORK SETTING (CORE)

Use the LAN PORT attached to the Main Board, and carry out the settings necessary for
network communication.
Note: This function is not available with this product.
����NETWORK�SETTING�(CORE)
->REMOTE(C)�������ENABLE
��IP�ADDRESS(C)
����---.---.---.---
��SUBNET�MASK(C)
����---.---.---.---
��GATE�WAY(C)
����---.---.---.---
��PRIMARY�DNS(C)
����---.---.---.---
��EXIT
����CURRENT�************
������***.***.***.***
�SELECT�WITH�SERVICE�BUTTON
���AND�PRESS�TEST�BUTTON
 Use the SERVICE Button to move the cursor to the desired test item.
(When setting IP ADDRESS, SUBNET MASK, GAME WAY or PRIMARY DNS, use the
underline as a guide.)
 Press the TEST Button to change the setting.
 Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.
(A) REMOTE (C)
This sets up whether a communication setting is automatic or manual.
ENABLE:
DISABLLE:
(B) IP ADDRESS (C)
This is one of the settings required for communication network. After setting the number, press
TEST Button on SET position to memorize the setting. If you set the REMOTE setting to
ENABLE, you cannot select this.
(C) SUBNET MASK (C)
This is one of the settings required for communication network. After setting the number, press
TEST Button on SET position to memorize the setting. If you set the REMOTE setting to
ENABLE, you cannot select this.
(D) GATE WAY (C)
This is one of the settings required for communication network. After setting the number, press
TEST Button on SET position to memorize the setting. If you set the REMOTE setting to
ENABLE, you cannot select this.
(E) PRIMARY DNS (C)
This is one of the settings required for communication network. After setting the number, press
TEST Button on SET position to memorize the setting. If you set the REMOTE setting to
ENABLE, you cannot select this.
(F) CURRENT
This displays the present setting value during a setup of each item [(B), (C), (D), (E)]. Pressing
TEST Button on SET position, the settings are memorized and the screen is changed.
www.seuservice.com
Sets the communication setting automatically.
Sets the communication setting manually.
62
(A)
(B)
(C)
(D)
(E)
(F)