Network Play - Sega OutRun2 Owner's Manual

18. NETWORK PLAY

Up to 4 machines can be linked for network play. Properly connected network cables and correct network
play settings are required for network play.
18-1 PRECAUTIONS REGARDING NETWORK PLAY SETUP
● Before starting to work, ensure that the Power SW is OFF. Failure to observe this
can cause electric shock or short circuit.
WARNING!
● Use care so as not to damage wirings. Damaged wiring can cause electric shock or
short circuit.
● Do not touch undesignated places. Touching places not designated can cause
electric shock or short circuit.
● This work should be performed by the site maintenance individual or other skilled
professional. Performing work by non-technical personnel can cause electric shock
hazard.
● When linking a number of machines, be sure to supply sufficient power for the
corresponding number of machines. Be sure to secure per machine current as
stated in this manual. Failure to observe this can cause a fire and an electric shock
accident.
● Due to the length of the network cable, the distance in between the machines is
limited. However, to avoid accidents, be sure to secure space in excess of 70 cm
between the machines.
● To perform work safely and avoid serious accident such as the cabinet's falling
down, do not perform work in places where step-like grade differences, a ditch, or
slope exist.
● To perform work safely, be sure to secure the space corresponding to number of
machines to be linked. Failure to observe this can cause accident.
CAUTION!
● To avoid accidents, use a cable cover that will not cause patrons to trip when laying
network cables in areas of heavy foot traffic.
● To prevent accidents and acts of vandalism, cover the network cables with the
strongest cover possible.
STOP
Network play is not possible between game machines with different cabinet types.
IMPORTANT!
When connecting several games machines together, make sure that a sufficient amount of electrical
power is available for each machine. Plan on providing 7A for each machine in 100-120V locations, and
4A in 220-240V locations.
www.seuservice.com 64