Sega After Burner Climax Owner's Manual page 136

3
Loosen 2 of M3 X 20 and 2 of M3 X 10 round head screws so the fl oor sensor moves freely.
14
Round Head Screw(2)
M3 X 20, W/Spring Washer
4
Adjust the sensors so the red ray from the sensor is targeted on the center of the mirror. This process may be
easier if a white sheet of paper is placed between the sensor and the mirror.
5
If the yellow LED keeps fl ashing or is OFF, check for any obstacles between a sensor and the mirror and
re-adjust.
130
FIG. 14b
Round Head Screw(2)
M3 X 10, W/Spring Washer