Sega After Burner Climax Owner's Manual page 47

3
As shown in fi gure 6-5c below, open the Hole Lid on the base and connect 2 Connectors, which are
positioned on the side with the 'LINDBERGH' Tag, through the hole to the Game Board in the Base.
During this process, be sure to close the Hold Lid as shown in the fi gure below, so as to prevent any injuries
to the maintenance personnel. There are 4 USB Connectors on the Game Board. Any of the connectors
can be used. Figure 6-5d shows 2 connectors disconnected from the Game Board. This is a fi gure just
to clearly show the connecting slot for the DVD wires. Actually, they should not be disconnected.
Truss Bolt(4), Black
M5 X 12
4
Stick the Board Number Sticker on the sticker in the upper left hand side of the Game Board.
FIG. 6-6c
USB MINI A
FIG. 6-6d
Hole Lid
DVD Wire
NH 6Pin
6
41