Network Setting - Sega After Burner Climax Owner's Manual

b. NETWORK SETTING
• Network play cannot be implemented without proper setting for network play.
Instead, and error message may be displayed
• When setting network play, be sure to match the GAME BD LINK ID to LINK ID of
the MOTION CONTROL BD . Do not set a LINK ID used by a different game unit.
Failure to observe this may lead to problems in operation.
• Setting changes do not become effective until EXIT is selected on the setting
screen. After a setting has been changed, be sure to always exit .
<Operation>
1
P ress the SELECT BUTTON, move the cursor to [LINK ID] and select it.
2
When the SET BUTTON is pressed the value set for [LINK ID] changes. Set one of the machines to [1] and
the other to [2]
3
Press the SELECT BUTTON and move the cursor to [EXIT].
4
When t he SET BUTTON is pressed, the NETWORK SETTING screen exits and the MOTION CONTROL
BD TEST MODE MENU reappears.
MOTION CONTROL BD

NETWORK SETTING

LINK ID : 1
> EXIT
SEAT BELT : LOCK
FLOOR SENSOR : OFF
MOTION STOP BUTTON : OFF
SELECT WITH SELECT BUTTON
AND PRESS SET BUTTON
FIG. 9-4b TEST MODE Screen
9
101