Sega After Burner Climax Owner's Manual page 49

7 CONNECTION OF POWER AND GROUND
• Use the power supply equipped with an earth leakage breaker. Use of power
supply without such a breaker could result in fi re if there is a current leakage.
• Have available a securely grounded indoor ground terminal. Without proper
grounding, customers could be electrocuted and product operations might not
always be stable.
• Use a Cable with an external diameter between 6~12. This MUST be followed so
that the Power Cable can be fi xed into place with the Cable Gland. If the power
cable is not completely fi xed into place with the Cable Gland, it may lead to
electric shocks to the customers, or cause the game unit to malfunction.
• Do not expose the power cord or ground wire. If these are exposed, customers
could stumble over them, for instance, and easily damage them. Additionally,
if these lines are damaged, there could be a risk of electrical shock or short
circuit. Set these lines at locations where they will not interfere with customer
traffi c, or attach covers to them.
• After laying out the power cord on the fl oor, be sure to always protect it. If the
power cord is left exposed, it can easily be damaged, resulting in electrical
shock.
• For safety, connect the Power Cable to the game unit fi rst.
• Use a 3-way power cable with an external diameter between 6~12 that has both
the power cable and the ground wire.
• When using the product's AC unit ground
terminal, use ground wire with a circular
terminal as shown in the illustration, and
establish ground securely. Avoid indiscriminant
grounding operations such as use of wire with
only its sheath peeled off.
• Connectionf the power cable to the indoor
power source should be executed by a
qualifi ed electrician. Unqualifi ed people should
not perform the operation.
The power cable is not included with the product. The power cable which confi rms
to the facility electrical specifi cations must be prepared by the owner.
6
43